Dodge DART User Manual page 66

ELECTRONICS
Voice Command Tips
• The Phone button is for placing calls, or responding to texts, or Phone controls
• The Voice Command
modes, (FM, SATELLITE), or Tuning to stations (95.5 or "Symphony Hall" )
• Take care to speak into the Voice Command System as calmly and normally as possible.
The ability of Voice Command to recognize user voice commands may be negatively
affected by rapid speaking or a raised voice level.
• Use longer names that are less easily mistaken for others. For examples, say "Call John
Doe" instead of "Call John".
• You can "chain" commands together for faster results. Say "Call John Doe, mobile", for
example.
• You can interrupt while the system is talking to you, enabling you to say your response
without waiting. Just press the
command.
Changing The Volume
• Start a dialogue by pressing the Phone button
"Help".
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level
while the Uconnect® system is speaking. Please note the volume setting for Uconnect® is
different than the audio system.
NOTE:
To access help, press the Uconnect® Phone
"help." Touch the display or push either
the help session.
Voice Text Reply
• Uconnect® Phone can read or send new text messages on your mobile phone.
• Your mobile phone must support Voice Text Reply over Bluetooth® in order to use this
feature. If the Uconnect® Phone determines your phone is not compatible with Voice Text
Reply messaging over Bluetooth® the "Messaging" button will be greyed out and the
feature will not be available for use.
NOTE:
• For mobile
www.UconnectPhone.com
• When the vehicle is in motion, Uconnect® Phone Voice Text Reply is only available
though Voice Commands.
64
button is for controlling Media, such as changing broadcast
phone compatibility
button on the steering wheel to say your
, then say a command for example -
button on the steering wheel and say
or button and say "cancel" to cancel
and pairing instructions, please visit