Dodge DART User Manual page 65

• (After the BEEP), say "dial" then the number. Or, (After the BEEP) say "call" then the name
as listed in your phone; see Phonebook below.
NOTE:
You can also initiate a call by using the touch-screen on the Phone main screen.
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect®, press the Phone button
• To end a call, press the Phone button
Mute (Or Unmute) Microphone During Call
• During a call, touch the mute soft-key on the Phone main screen to mute and unmute the
call.
Transfer Ongoing Call Between Handset And Vehicle
• During a call, touch the Transfer soft-key on the Phone main screen to transfer an on
going call between handset and vehicle.
Common Phone Commands (Examples)
"Call John Smith"
"Call John Smith mobile"
"Dial 1 248 555 12XX"
"Call Emergency"
"Call Towing Assistance"
"Redial"
"Search for John Smith"
Phonebook
• Uconnect® radios will automatically down-
load your contact list from your paired
phone, if this feature is supported by your
phone. Entries are updated each time that
the phone is paired. If your contact list
entries do not appear, check the settings
on your phone. Some phones require you to
enable this feature manually.
• Your phonebook can be browsed on your ra-
dio screen, but editing can only be done on
your phone. To browse, touch the Phone
soft-key, then the Phonebook soft-key.
• Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are
shown at the top of your main phone screen.
ELECTRONICS
.
"Show Missed Calls"
"Show Recent Calls"
"Show My Contacts:
"Redial"
"Call Back"
"Send 1234#" (only available while call is active)
.
63