Dodge DART User Manual page 42

ELECTRONICS
NOTE:
• Your vehicle cannot be equipped with the USB Port without having the available Uconnect®
Voice Command feature.
• When connecting your MP3/WMA Player device for the first time, the system may take
several minutes to read your music, depending on the number of files. For example, the
system will take approximately 5 minutes for every 1000 songs loaded on the device.
However, music on the device will play while reading continues in the background. Also
during the reading process, the Shuffle and Browse functions will be disabled. This process
is needed to ensure the full use of your MP3/WMA Player features and only happens the
first time it is connected. After the first time, the reading process of your iPod® will take
considerably less time unless changes are made or new songs are added to the playlist.
• The USB port supports certain Mini, Classic, Nano, Touch, and iPhone® devices. The USB port
also supports playing music from compatible external USB Mass Storage Class memory
devices. Some iPod® software versions may not fully support the USB port features. Please
visit Apple's website for iPod® software updates.
Uconnect® Phone (BLUETOOTH® HANDS FREE CALLING)
• The Uconnect® Phone is a voice-activated, hands-free, in-vehicle communications sys-
tem with Voice Command Capability (see Voice Command section).
• The Uconnect® Phone allows you to dial a phone number with your mobile phone using
simple voice commands.
• Refer to your vehicle Owner's Manual on the DVD for further details.
NOTE:
• The Uconnect® Phone requires a mobile phone equipped with the Bluetooth® Hands-Free
Profile, Version 1.0 or higher. For Uconnect® customer support, call 1–877–855–8400 or
visit www.UconnectPhone.com.
• Prior to starting the pairing procedure, ensure all additional Bluetooth® devices or phones
within the vehicle have their Bluetooth® disabled.
Phone Pairing
• To use the Uconnect® Phone feature, you must first pair your bluetooth phone with the
Uconnect® system.
Start Pairing Procedure
• Press the "Phone" button
• Wait for the "ready" prompt and BEEP.
• (After the BEEP), say "Setup Phone Pairing".
• (After the BEEP), say "Pair a Phone".
• Follow the audible prompts.
• You will then be asked if paired device should be set to favorite.
40
to begin.