Connecting The Lindy Extender - Lindy 32351 Manual

Type of mouse / system
Connected at bootup
PS/2
PS/2
IntelliMouse / CPU Switch
IntelliMouse / CPU Switch
To restore lost mouse movement on a CPU connected to the LINDY CPU Switch:
1) Select the CPU that has lost its mouse movement
2) Activate the on-screen menu using the keyboard hotkeys
3) Press F1 to view additional menus
4) Select the FUNCTIONS menu
5) Select RESTORE STANDARD MOUSE or RESTORE INTELLIMOUSE
6) Exit the on-screen menu
2.10 Connecting a LINDY extender
You may connect external LINDY extenders (i.e. a receiver / transmitter pair) to the
LINDY CPU Switch's KVM connectors. If you do this then you should power the
LINDY extender using their optional power adapter.
LINDY extender requirements
Your LINDY extender unit will need to be fitted with firmware version 1.08 or higher if
it is a Pro Extender model or 2.08 or higher if it is a Junior model. If you have an
earlier LINDY extender unit please contact LINDY technical support for advice.
LINDY CPU Switch Dual Junior Installation and Use
Driver type
PS/2 only
IntelliMouse
PS/2 only
IntelliMouse
Likely expected
data format
PS/2
PS/2
PS/2
IntelliMouse
Suggested
restoration
Standard
Standard
Standard
IntelliMouse
Page 23