White Mountain Hearth DVTL27FP90N-1 Installation Instructions And Owner's Manual page 47

MULTIFUNCTION REMOTE OpERATING INSTRUCTIONS
Blower Control (Fan)
If the appliance is equipped with a hot air circulating fan, the
speed of the fan can be controlled by the Proflame system.
The fan speed can be adjusted through six speeds. To activate
this function, use the Mode Button (Figure 56) to index the fan
control icon. See Figure 71. Use the Up/Down Arrow Buttons
(Figure 56) to turn on off or adjust the fan speed. See Figure 72.
A single "beep" will confirm reception of the command.
OFF
OFF
33740-7-0515
Figure 71
Figure 72
Remote Dimmer Control (Light)
The auxiliary function controls the AUX power outlet by the dim-
mable light control. To activate this function, use the Mode Button
(Figure 56) to index to the AUX icon. See Figures 73 and 74.
The intensity of the output can be adjusted through six levels.
Use the Up/Down Arrow Buttons (Figure 56) to adjust the output
level. A single "beep" will confirm reception of the command.
Note: This function is available only with the IFC control Module.
OFF
OFF
Figure 73
Figure 74
Page 47