Maintenance - Sunbeam 1636 Instruction Manual

Use your SUNBEAM
continuously to one area can overheat hair and scalp. When using a "High" heat setting, hold
the blower opening a few inches away from the hair, drying one section at a time. Work layers
of hair in quick strokes. Keep the dryer in motion until drying and styling are complete.
1. If the Hair Dryer has been accidentally immersed in water, contact your nearest
Sunbeam Hospitality Distributor. DO NOT ATTEMPT TO USE THE HAIR
®
DRYER AGAIN.
2. If the RESET button pops out during use and the Hair Dryer stops working, this may indicate
a malfunction. Allow the Hair Dryer to cool before pressing RESET button and try again. If
RESET button pops out again, then return it to an authorized service center.
3. If the Hair Dryer does not function as described in the test procedure above, contact your
nearest Sunbeam
M
AiNTeNANce
Your dryer requires no special maintenance or servicing. No lubrication is needed.
Repairs when necessary must be performed by a recognized service facility. For proper
operating performance the DRYER MUST BE KEPT CLEAN. Blocked or clogged air intake
openings will cause the Dryer to overheat.
1. Always unplug the cord from outlet when Dryer is not in use or when cleaning it.
2. Clean lint and dust from air intake opening and/or the lint filter with a
small brush. (Frequently check the air intake grill or filter for build-up).
3. To clean the exterior surface and attachments, wipe with a slightly damp cloth.
4. Handle the cord carefully to prevent twisting, pulling or jerking that will damage it.
5. To store or pack Dryer, let it cool to room temperature. DO NOT WRAP THE CORD AROUND
THE DRYER. Coil cord loosely or tie in large loops with a twist tie.
HOSPITALITY hair dryer with care. Directing a high volume of heat
®
i
MPorTANT
Hospitality Distributor.
®
c
AuTioN
i
NForMATioN
, c
Are AND
6
c
leANiNG