Maintenance, Care And Cleaning - Sunbeam HD3005-001 Instruction Manual

IMPORTANT INFORMATION
1. If the Hair Dryer has been accidentally immersed in water, contact your
nearest Sunbeam
DO NOt AttEMpt tO USE tHE HAIR DRyER AGAIN.
2. If the RESET button pops out during use and the Hair Dryer stops working,
this may indicate a malfunction. Allow the Hair Dryer to cool before pressing
RESET button and try again. If RESET button pops out again, then return it
to an authorized service center.
3. If the Hair Dryer does not function as described in the test procedure above,
contact your nearest Sunbeam

MAINTENANCE, CARE AND CLEANING

Your dryer requires no special maintenance or servicing. No lubrication is needed.
Repairs when necessary must be performed by a recognized service facility.
For proper operating performance the DRYER MUST BE KEPT CLEAN.
Blocked or clogged air intake openings will cause the Dryer to overheat.
1. Always unplug the cord from outlet when Dryer is not in use or when cleaning it.
2. Clean lint and dust from air intake opening and/or the lint filter with a small brush.
(Frequently check the air intake grill or filter for build-up).
3. To clean the exterior surface and attachments, wipe with a slightly damp cloth.
4. Handle the cord carefully to prevent twisting, pulling or jerking that will damage it.
5. To store or pack Dryer, let it cool to room temperature. DO NOT WRAP THE CORD
AROUND THE DRYER. Coil cord loosely or tie in large loops with a twist tie.
Hospitality Distributor.
®
Hospitality Distributor.
®
6