Table of Contents
Advertisement
10 Maintenance and service
Lamp replacement - extra main beam
The extra main beam bulb is fitted inside the
headlamp's larger cover.
NOTE
10
Applies to cars with Xenon headlamps*.
1. Detach the headlamp (p. 375).
2. Remove the cover (p. 376).
3. Detach the bulb by turning anticlockwise
and then pulling straight out.
4. Unplug the connector from the bulb.
5. Replace the bulb and align it in the socket
and turn clockwise in order to secure it. It
can only be secured in one position.
Reinstall the parts in reverse order.
Related information
•
Lamps - specifications (p. 381)
*
378
Option/accessory, for more information, see Introduction.
Lamp replacement - direction
indicators front
The direction indicator lamp is fitted inside
the headlamp's smaller cover.
1. Detach the headlamp (p. 375).
2. Detach the cover by pulling it straight out.
3. Pull the bulb holder in order to extract the
bulb.
4. Press and simultaneously turn the bulb
anticlockwise in order to detach it.
Reinstall the parts in reverse order.
Related information
•
Lamps - specifications (p. 381)
Lamp replacement - rear lamp
Rear direction indicators, rear fog lamp and
reversing lamp are replaced from inside the
cargo area.
Lamp housing, rear
The bulbs for reversing lamp, fog lamp and
direction indicator in the rear lamp cluster are
replaced from inside the cargo area.
1. Open the panel.
2. Remove the insulation that is fitted in
front of the bulb holder by pulling it
straight out.
3. Press down the catch and pull out the
bulb holder.
4. Remove the blown bulb by pressing it in
and turning anticlockwise.
5. Fit a new bulb, press down and turn
clockwise.
Advertisement
Table of Contents
