Table of Contents
Advertisement
Lane Departure Warning (LDW) -
function
Certain settings can be made for the Lane
Departure Warning function.
Off & On
LDW is engaged or disengaged using a but-
ton on the centre console. An indicator lamp
in the button illuminates when the function is
switched on.
This function is complemented in the com-
bined instrument panel with intuitive graphics
in different situations.
Personal preferences
Settings are made from the centre console's
screen via the menu system in MY CAR. For
a description of the menu system, see MY
CAR (p. 110).
Select from the options:
•
On at startup
- The function enters
standby mode every time the engine is
started. Otherwise the same value as
when the engine was switched off is
obtained.
•
Increased sensitivity
- The sensitivity
increases, an alarm is triggered earlier
and fewer limitations apply.
Related information
•
Lane Departure Warning (LDW)* (p. 238)
•
Lane Departure Warning (LDW) - limita-
tions (p. 240)
•
Lane Departure Warning (LDW) - opera-
tion (p. 239)
•
Lane Departure Warning (LDW) - symbols
and messages (p. 241)
07 Driver support
Lane Departure Warning (LDW) -
operation
LDW is complemented in the combined
instrument panel with intuitive graphics in dif-
ferent situations. Here are some examples:
The LDW function's side lines (marked in red in
the figure).
•
The LDW symbol has WHITE side lines -
the function is active and detects/"sees"
one side line, or both.
•
The LDW symbol has GREY side lines -
the function is active but detects neither
left nor right side line.
or
•
The LDW symbol has GREY side lines -
the function is in standby mode because
the speed is below 65 km/h.
•
The LDW symbol has no side lines - the
function is deactivated.
*
Option/accessory, for more information, see Introduction.
07
}}
239
Advertisement
Table of Contents
