Table of Contents
Advertisement
10 Maintenance and service
Lamp replacement - main beam
The main beam bulb is fitted inside the head-
lamp's larger cover.
NOTE
10
Applies to cars with halogen headlamps.
1. Detach the headlamp (p. 370).
2. Remove the cover (p. 371).
3. Detach the bulb by turning anticlockwise
and then pulling straight out.
4. Unplug the connector from the bulb.
5. Replace the bulb and align it in the socket
and turn clockwise in order to secure it. It
can only be secured in one position.
Reinstall the parts in reverse order.
Related information
•
Lamps - specifications (p. 375)
*
372
Option/accessory, for more information, see Introduction.
Lamp replacement - extra main beam
The extra main beam bulb is fitted inside the
headlamp's larger cover.
NOTE
Applies to cars with Xenon headlamps*.
1. Detach the headlamp (p. 370).
2. Remove the cover (p. 371).
3. Detach the bulb by pressing the holder
downwards.
4. Unplug the connector from the bulb.
5. Fit the new bulb in the socket and snap it
in. It can only be secured in one position.
Reinstall the parts in reverse order.
Related information
•
Lamps - specifications (p. 375)
Lamp replacement - direction
indicators front
The direction indicator lamp is fitted inside
the headlamp's smaller cover.
1. Detach the headlamp (p. 370).
2. Remove the small round cover.
3. Pull the bulb holder in order to extract the
bulb.
4. Remove the blown bulb and fit a new
one. It can only be installed in one way.
5. Fit the bulb holder in the socket and
press until a clicking sound is heard.
6. Refit the cover. It must be fitted and
pressed in until a clicking sound is heard.
Reinstall the parts in reverse order.
Related information
•
Lamps - specifications (p. 375)
Advertisement
Table of Contents
