Controlling The Volume; Using Auto-Wake - Bose Solo 15 Owner's Manual

Controlling the volume

On the remote:
• Press + to increase the volume.
• Press – to decrease the volume.
• Press to mute or unmute the audio.
Note: To confirm your TV speakers are turned off, see page 15.

Using auto-wake

When the Solo 15/10 system is powered on but not playing audio, the system
powers off after one hour.
To wake the system, press
You can set the Solo 15/10 system to automatically wake whenever a sound signal is
received.
To enable auto-wake:
1. Point the remote at the system.
2. Press and hold
The system emits three short ascending tones (going up) and the system status
indicator flashes amber.
To disable auto-wake:
1. Point the remote at the system.
2. Press and hold
The system emits three short descending tones (going down) and the system
status indicator flashes red.
Note: If your devices become out of sync, see "Resyncing your cable/satellite box
and TV" on page 23.
on the remote.
on the remote for 5 seconds.
on the remote for 5 seconds.
Operation
English - 21