Bose Solo 15 Owner's Manual page 30

Care and Maintenance
Problem
Remote control
is inconsistent or
does not work
Sound is
distorted
Sound is coming
from the TV
System status
indicator is red
30 - English
What to do
• Check the batteries to see if they are installed properly or if they
need to be replaced. Refer to "Replacing the remote batteries" on
page 31.
• Point the remote control at the sound system when you press a
button.
• Check that the system status indicator on the sound system flashes
when you press the remote volume or mute button.
• For the Solo 15 system remote
- Point the remote control at the device you want to control.
- Check that the remote button for the selected source flashes
when you press the volume button.
- There may be more than one device code for your brand of
device. Refer to "Programming your remote to control your TV"
on page 22.
• Unplug the system's power cord from the AC (mains) outlet for one
minute.
• Reset the system: Unplug the power cord for at least one minute.
Plug the power in again and listen for the system to emit two tones
confirming it has power.
• Make sure cable connections are secure on the sound system and
TV.
• If the sound system is connected to a TV output labelled
VARIABLE (VAR), reduce the TV volume.
• Bypass the TV and connect directly to the source using one of the
Alternate setup methods. Refer to page 17.
• Reset the system: Unplug the power cord for at least one minute.
Plug the power in again and listen for the system to emit two tones
confirming it has power.
• Turn off your TV's internal speakers.
• Adjust the TV volume.
• System error. Call Bose Customer Service.