Exposure to liquids may create a failure and/or fire hazard. • Do not place naked flame sources, such as lighted candles, on or near Bose Corporation hereby declares that this product is in compliance with the product. the essential requirements and other relevant provisions of Directive •...
This device complies with FCC and Industry Canada RF radiation exposure limits Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under set forth for general population. It must not be co-located or be operating in license.
Contents Introduction Care and Maintenance About your Solo 15/10 series II TV sound system ......5 Troubleshooting ..................18 System features................5 Replacing the remote batteries ............19 Unpacking ....................5 Solo 15 series II system remote control ........19 Solo 10 series II system remote control ........
TV sound system Carefully unpack the carton and confirm that the following parts are included: The Solo 15/10 series II system comes in two configurations: • The Solo 15 series II system has a metal grille and a programmable universal remote control.
Connect your TV to the system using one of the three cable options. The optical cable is the preferred method for connection. Place the Solo 15/10 series II system where you had your TV. Tip: If your TV does not have an optical, coaxial or analog connector, see page 15.
Inserting the plug in the wrong orientation can damage the plug and/or the connector. Hold the optical cable’s plug with the Bose logo facing up. Connecting to power Align the plug with the Optical connector on the system and insert the plug carefully.
Refer to your TV’s owner’s guide for more information. • The Bose Solo 15/10 series II system is designed to fit under TVs that weigh no more than 75 lbs (34 kg) and have bases no wider Powering on the system than 24"...
Using the System Using the Solo 15 series II system universal remote Use the remote to control sources connected to the system, adjust the system volume, change channels, use playback functions and enable cable/satellite box functions. controls the Bluetooth feature Source selection ®...
Using the System Programming the universal remote Customizing the power button You can program the universal remote to control your source, such You can customize (power button) on your remote to power as a TV, DVD/Blu-ray Disc player, cable/satellite box, game system on/off your system, TV and cable/satellite box simultaneously.
Using the System Using the Solo 10 series II system remote control Use the remote to power on/off the system, adjust the volume and bass, use dialogue mode and control the Bluetooth feature. ® Powers on/off the Switches audio from a Bluetooth device to soundbar and your TV controls auto-wake...
Dialogue mode provides optimal sound quality for dialogue-only programs, such as news and talk shows, by decreasing the Bose offers the Solo 15 series II system universal remote control for system’s bass settings. separate purchase. Contact Bose Corporation or your local dealer for more information.
® See “Troubleshooting” on page 18 for more information. blinks blue. On your mobile device, delete Bose Solo system from the Bluetooth menu. The system emits a tone and is ready to pair a device (see “Pairing a Bluetooth device”).
Blinking: System is muted Amber Dim: Standby, auto-wake is enabled Solid: Dialogue mode Blinking: Dialogue mode, system is muted System error: Call Bose Customer Service. Refer to the contact sheet in the carton. Bluetooth indicator ® Indicator activity System state...
Alternate Setup You may need to use an alternate setup method for the following reasons: • No sound from a source(s) connected to your TV • No optical, coaxial or analog connector on your TV No sound from a source(s) connected to your TV Some TVs do not deliver sound from connected sources to the system.
Page 16
Alternate Setup Connecting a source to the system Connecting two sources to the system If you do not get sound from a source, such as a DVD/Blu-ray If you do not get sound from any sources, such as a DVD/Blu-ray Disc player, cable/satellite box, game system or DVR connected Disc...
Alternate Setup Option2 Connecting a TV headphones connector to the system This figure shows two source connections using a coaxial cable and analog cable. If your TV only has a headphones connector, use a 3.5 mm to RCA stereo cable (not provided) to connect to the system. AudioOUT Audio OUT Insert the stereo plug into the TV headphones connector.
• Turn off your TV speakers (see page 8). Sound is coming from the TV • Mute or decrease the volume your TV. • System error: Call Bose Customer Service. Refer to the contact sheet in the carton. Status indicator is red 18 - English...
Customer service Remove both batteries. Dispose of the batteries according to the regulations in For additional help, contact Bose Customer Service. Refer to the your area. contact sheet in the carton. Insert two AA (IEC-LR6) 1.5V batteries or the equivalent. Match the + and –...