Onboard Computer - Bosch SHE9PT55UC Operating Instructions Manual

Auto Power Off
To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
adjusted from P:00 to P:02.
To change the setting:
1 Press the [On/Off] button.
Hold down the "A" button and press [Start] until the display indicates "H:00".
2
Release both buttons.
3
4 Press the "A" button until the display indicates "P:00".
Press the "C" button until the display corresponds with your requirements.
5
P:00 = dishwasher does not turn off automatically
P:01 = dishwasher turns off automatically after 1 minute
P:02 = dishwasher turns off automatically after 120 minutes (2 hours)
Press [Start] to save the setting.
6
Sapphire Glow®
The interior light comes on when the door is opened, even if the unit is powered off. When the door is
closed or slightly ajar, the interior light is off.
To change the setting:
1 Press the [On/Off] button.
Hold down the "A" button and press [Start] until the display indicates "H:00".
2
Release both buttons.
3
4 Press the "A" button until the display indicates "P:00".
Press the "C" button to switch between "P:00" = always ON, "P:01"= always OFF, and "P:02" =
5
always OFF and press [Start] to save the setting.

Onboard Computer

You can switch the onboard computer (additional program information) off or on. Proceed as follows:
Press the [On/Off] button.
1
Hold down the "A" button and press [Start] until H:0.. is indicated on the digital display.
2
3 Release both buttons. The LED for button "A" flashes and the digital display shows the factory set-
ting H:04.
Press the "A" button until the factory set value C:01 is indicated on the digital display.
4
To change the setting:
1 Press the "C" button to switch the onboard computer (additional program information) to C:00 =
OFF or C:01 = ON.
Press [Start] to save the setting.
2
14