Delay Start; Intensive Drying - Bosch SHE9PT55UC Operating Instructions Manual

Hide thumbs Also See for SHE9PT55UC:
Table of Contents

Advertisement

Available languages

Available languages

Setting the amount of rinse aid
The amount of rinse aid dispensed can be set from "r:00" to "r:06".
To change the setting:
1
Press the [On/Off] button.
Hold down the "A" button (see page 4) and press [Start] until the display indicates "H:00".
2
Release both buttons.
3
Press the "A" button until the display shows "r:05".
4
Press the "C" button to select the desired setting.
5
"r:00" = dispenser is OFF
"r:01" = lowest setting
"r:02" = low setting
"r:03" = medium setting
"r:04" = medium/high setting
"r:05" = high setting
"r:06" = highest setting
Press [Start] to save the setting.
6

Delay Start

You can delay the start of the cycle in one hour increments up to 24 hours.
To set delay start:
Press the [On/Off] button.
1
Press the [+] button until the display jumps to "h:01".
2
Press the [+] or [-] button until the displayed time corresponds with your requirements.
3
h:01 = 1 hour delay
h:24 = 24 hour delay
Press [Start] to activate delay start.
4
To cancel delay start:
1
Press the [+] or [-] button until "h:00" is indicated on the digital display.
2
Press [Start] to save setting.
Cycle Completion Signal
1
Open the door and press the [On/Off] button.
2
Hold down the "A" button (see page 4) and press [Start] until the display indicates "H:00".
Release both buttons.
3
Press the "A" button until the display shows "b:02".
4
Press the "C" button to increase or decrease the tone "b:00" = OFF and "b:03" = LOUDEST
5
Press [Start] to save setting and close the door.
6

Intensive Drying

The final rinse uses a higher temperature which improves the drying results. The running time may
increase slightly.
To turn intensive drying on:
Press the [On/Off] button.
1
Hold down the "A" button (see page 4) and press [Start] until the display indicates "H:00".
2
Release both buttons.
3
4
Press the "A" button until the display shows "d:00".
5
Press the "C" button to turn intensive drying on or off. "d:01" = ON and "d:00" = OFF
Press [Start] to save setting and close the door.
6
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents