COMPRO IP55 User Manual page 21

Running the iWizard Installer
Before running Compro software, make sure you have the IP Camera beside you. To install the software, insert
the installation CD supplied with the camera into your CD-ROM drive, and the iWizard installer will start and
guide you during the installation process of the hardware and software for your IP camera. You will be asked
to select the displayed language first. Then please click on [IP Camera Setup] and select the camera you wish
to install, and follow the steps below.
1. The wizard searches for all available
cameras on your local network. Click on
a camera from connected camera list,
and wait until the live video and camera
information are displayed on the right
side. (You can double-check the device
name and the MAC ID which are printed
on the serial number sticker at the back
of IP camera and on the package). Then,
click [Next].
2. Meanwhile, if you see the Windows
Security Alert dialog box during the
search, please choose [Unblock]..
Note:
If Autorun has been disabled in your computer, please browse the
contents of the installation CD and double-click on the "iWizard.exe"
file to run the setup wizard.
Figure 3-10. Security alert dialog (Windows XP)
Figure 3-9. Camera selection
Installing Camera Software
Chapter 3: Installtion
3-7