Table of Contents
Advertisement
DITCHER HEAD INSPECTION
•
Inspect blades and bolts on dithcer head
assembly for looseness and excessive wear.
Make sure the unit is securely blocked up
before doing maintenance. Replace damaged
and worn blades as complete sets to maintain
unit balance.
•
Ensure hydraulic lines are properly connected
to the hydraulic motor. Check for hydraulic
leaks along hoses and fittings. DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks.
•
Ensure rubber deflectors are in position and not
damaged. Replace worn, broken, and missing
sections immediately.
•
Ensure hydraulic cylinder is installed and retained correctly. Ensure the proper size pins are used to retain
the cylinder in place and are secured with pins. OPS-B- 0029
Do not put hands or feet under mower decks. Blade Contact can result in
serious injury or even death.
decks are securely blocked up.
All Safety Shields, Guards and other safety devices including (but not limited to) - Deflectors,
Steel Guards and Gearbox Shields must be used and maintained in good working condition.
All safety devices should be inspected carefully at least daily for missing or broken components.
Missing, broken, or worn items must be replaced at once to reduce the possibility of injury or
death from thrown objects, entanglement, or blade contact.
MACHETE BOOM 01/05
© 2005 Alamo Group Inc.
OPERATION
Stay away until all motion has stopped and the
(SFL-2)
Operation Section 3-18
(SSM-07)
Advertisement
Table of Contents
