Operation Procedure Of Diag Menu And Sub-Menu; Selection Of Diag Menu Item Or Sub-Menu Item; Switching Selection Of Diag Menu Item And Sub-Menu Item; Functions In Diag Mode/Initial Settings Used To Start Diag - Yamaha rx-sl100 Service Manual

QQ
3 7 63 1515 0
• Operation procedure of DIAG menu and
SUB-MENU
Entering Menu Select Mode
There are 15 MENU items, each of which has some SUB-
MENU items.
To select a DIAG MENU item or a SUB-MENU item, press
the "TUNER" key to enter the menu select mode. (The
"TUNER" segment of the FL display on this unit flashes to
indicate that the menu select mode is at work.)
* When about 5 seconds elapse with no menu item
selected, the menu select mode is cancelled. (The
"TUNER" segment lights up.)
Pressing the "TUNER" key again will restore the menu
select mode setting.

Selection of DIAG MENU item or SUB-MENU item

While in the menu select mode, turn the "VOLUME/
SELECT" knob. Items advance forward when the knob is
turned clockwise and rearward when it is turned
counterclockwise.
Switching selection of DIAG MENU item and SUB-
MENU item
While in the menu select mode, press the "VOLUME/
SELECT" knob. Each pressing changes between the DIAG
MENU item selection state and SUB-MENU item selection
TE
L 13942296513
state alternately.
• Functions in DIAG mode
In addition to the DIAG menu items, functions as listed
below are available.
• Input selection
• Center/Rear/Rear Center/Subwoofer level adjustment
• Muting
• Power on/off
• Master volume
* Functions related to the tuner and the set menu are not
available.
* It is possible to confirm Menu No.11 IF STATUS while
keeping the signal process (operation status) of each
DIAG menu by pressing the "INPUT" key twice.
• Initial settings used to start DIAG
The following initial settings are used when starting DIAG.
When DIAG is canceled, these settings are restored to
www
those before starting DIAG.
• Master volume: -40dB
• Input: DVD (6CH INPUT OFF)
.
• Effect level: 0dB
• Audio mute: OFF
• Speaker setting: LARGE / BASS OUT = BOTH
• DIAG menu: DSP THROUGH (1. ANALOG BYPASS)
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3 1 5
co
.
RX-SL100/RX-SL100RDS
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9
19