Removing The Processor; Installing The Processor; Removing The System Fan - Dell OptiPlex 9010 Mini-Tower Owner's Manual

Removing the Processor

1. Follow the procedures in
2. Remove the cover.
3. Remove the heat sink.
4. Press the release lever down and then move it outward to release it from the retention hook. Lift the processor
cover and remove the processor from the socket, and place it in antistatic bag.

Installing the Processor

1. Insert the processor into the processor socket. Ensure the processor is properly seated.
2. Gently lower the processor cover.
3. Press the release lever down and then move it inward to secure it with the retention hook.
4. Install the heat sink.
5. Install the cover.
6. Follow the procedures in

Removing the System Fan

1. Follow the procedures in
2. Remove the cover.
3. Press the clip to release and disconnect the system fan cable from the system board.
24
Before Working Inside Your Computer .
After Working Inside Your Computer .
Before Working Inside Your Computer .