Installing The System Fan; Removing The Thermal Sensor - Dell OptiPlex 9010 Mini-Tower Owner's Manual

4. Pry and remove the system fan away from the four grommets securing it to the back of the computer.

Installing the System Fan

1. Place the chassis fan in the chassis.
2. Pass the four grommets through the chassis and slide outward along the groove to secure in place.
3. Connect the fan cable to the system board.
4. Install the cover.
5. Follow the procedures in

Removing the Thermal Sensor

1. Follow the procedures in
2. Remove the cover.
After Working Inside Your Computer .
Before Working Inside Your Computer .
25