Installing The Optical Drive; Removing The Speaker - Dell OptiPlex 9010 Mini-Tower Owner's Manual

6. Repeat steps 4 to 5 to remove the second optical drive (if available).

Installing the Optical Drive

1. Push the optical drive from the front toward the back of the computer till it is secured by the optical-drive latch.
2. Connect the data cable and power cable to the back of the optical drive.
3. Install:
a) front bezel
b) cover
4. Follow the procedures in

Removing the Speaker

1. Follow the procedures in
2. Remove the cover.
3. Disconnect and release the speaker cable from the system board.
18
After Working Inside Your Computer .
Before Working Inside Your Computer .