Table of Contents
Advertisement
Steps
1. Ensure that the securing clips are in an open position.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Insert the memory module into the memory-module connector until the memory module snaps into position and the securing
clip locks in place.
NOTE:
The securing clips return to the locked position. If you do not hear the click, remove the memory module and
reinstall it.
NOTE:
Repeat step 1 to step 3 when installing more than one memory module in your computer.
Next steps
1. Install the
2.5/3.5-inch hard-drive
2. Install the
side
cover.
3. Follow the procedure in
Processor
Removing the processor
Prerequisites
1. Follow the procedure in
2. Remove the
2.5/3.5-inch hard-drive
3. Remove the
side
cover.
4. Remove the
fan and heat-sink
NOTE:
The processor may become hot during normal operation. Allow sufficient time for the heat sink to cool before you
touch it.
caddy.
after working inside your
before working inside your
caddy.
assembly.
computer.
computer.
Removing and installing components
45
Advertisement
Table of Contents
