Output Rectifier Modules Removal And Replacement - Lincoln Electric INVERTEC SVM158-A Service Manual

F-83
OUTPUT RECTIFIER MODULES REMOVAL AND
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical
troubleshooting assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
The following procedure will aid the technician in removing the output rectifier modules for
maintenance or replacement.
MATERIALS NEEDED
3/16" Allen wrench
9/64" Allen wrench
5/16" Nut Driver
7/16" Wrench
Flathead Screwdriver
Penetrox A-13 Heatsink Compound
Thin Knife/Screwdriver
This procedure takes approximately 30 minutes to perform.
TROUBLESHOOTING & REPAIR
REPLACEMENT
WARNING
V350-PRO
F-83