Spi Cable Resistance And Voltage Test - Lincoln Electric INVERTEC SVM158-A Service Manual

F-45

SPI CABLE RESISTANCE AND VOLTAGE TEST

Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical
troubleshooting assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
This test will help determine if there is a possible "open" in the SPI cable and also determine
if the correct supply voltages are being applied to the boards in the SPI network.
MATERIALS NEEDED
Volt/Ohmmeter
5/16" Nut Driver
This procedure takes approximately 35 minutes to perform.
TROUBLESHOOTING AND REPAIR
WARNING
V350-PRO
F-45