IBM RS/6000 44P 170 Installation Manual page 41

4. If you have additional options to install, refer to "Option List" on page 30 for
the appropriate page number, and skip to that section. Otherwise, continue
with these steps.
5. Replace the cover support bridge as described in "Replacing the Cover
Support Bridge" on page 26.
6. Replace the left side cover as described in "Replacing the Left Side Cover"
on page 25.
7. Reconnect all removed cables.
8. Turn on the power.
9. You may have to enter SMS to restore the bootlist in order to boot AIX. The
bootlist command may need to be run while you are logged in as root
user. This restores the custom bootlist and allows the option of Select
Software under multiboot to start the operating system. IP (Internet
Protocol) parameters may also need to be rebuilt. Refer to your AIX
documentation for instructions.
10. After booting AIX, log in as root user. Reset the time and date using the
date command. (Type: date ?).
Chapter 3. Installing Options for the RS/6000 44P Series Model 170
29