Step 18: Plug In The Power Cables - IBM RS/6000 44P 170 Installation Manual

Step 18: Plug in the Power Cables

1. Plug the power cable into the system unit.
2. Plug the power cables into the display and attached devices.
3. Plug these power cables into electrical outlets.
CAUTION:
This product is equipped with a three-wire power cable and plug for your
safety. Use this power cable with a properly grounded electrical outlet to
avoid electrical shock.
4. Wait for the operator panel to display OK.
Chapter 1. Setting Up the RS/6000 44P Series Model 170
15