Device/Communication - Utax 3005ci User Manual

Status/Job Cancel > Device/Communication

Device/Communication

Configure the devices/lines installed or connected to this machine or check their status. You can also control devices
depending on their status.
1
2
Display the screen.
1
Press the [Status/Job
2
Press [Device/Communicate].
Status
Scanner
Ready.
Printer
Ready.
Removable Memory
2GB/16GB
Format Remove
FAX Port 1
Receiving...
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs Storing Jobs
The screen to check the status or configure the devices is displayed.
Check the status.
The items you can check are described below.
"Scanner"
The status of an original scanning or the error information (paper jam, opened cover, etc.) is
displayed.
"Printer"
Error information such as paper jam, out of toner, or out of paper, and status such as waiting or
printing are displayed.
"Hard Disk"
The information such as formatting, overwriting for erasure, and error occurrence is displayed.
"Removable Memory (USB Memory)"
• The usage and capacity of the external media connected to this machine are displayed.
• Press [Format] to format external media.
IMPORTANT
When [Format] is pressed, all data in the external media is erased.
• Press [Remove] to safely remove the external media. For details, refer to
USB Memory on page
Cancel] key.
Hard Disk
Overwriting...
FAX Port 2
Receiving...
Line Off
i-FAX Check New FAX
Paper/
Device/
Close
Communicate
Supplies
7-18.
7-17
Removing the