Utax 3005ci User Manual page 483

Troubleshooting > Troubleshooting
Error
Code
1104 Failed to send the e-mail.
Failed to send i-FAX.
1105 Failed to send via SMB.
Failed to send the e-mail.
Failed to send via FTP.
Failed to send i-FAX.
1106 Failed to send the e-mail.
Failed to send i-FAX.
1131 Failed to send via FTP.
1132 Failed to send via FTP.
2101 Failed to send via SMB.
Failed to send via FTP.
Failed to send the e-mail.
Failed to send i-FAX.
Message
Check the E-mail address.
If the address is rejected by the domain, you cannot
send the E-mail.
Check the i-FAX address.
If the address is rejected by the domain, you cannot
send the E-mail.
Select [On] of the SMB settings on the Embedded
Web Server RX.
Select [On] of the SMTP settings on the Embedded
Web Server RX.
Select [On] of the FTP settings on the Embedded
Web Server RX.
Select [On] of the i-FAX settings on the Embedded
Web Server RX.
Check the sender address of SMTP on the Embedded
Web Server RX.
Select [On] of the secure protocol settings on the
Embedded Web Server RX.
Check the following of the FTP server.
•
•
Check the network and SMB settings.
•
•
•
•
•
Check the network and FTP settings.
•
•
•
•
•
Check the network and Embedded Web Server RX.
•
•
•
•
•
Corrective Actions
NOTE
NOTE
Is FTPS available?
Is the encryption available?
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Host name and IP address
Port number
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
Host name and IP address
Port number
The network cable is connected.
The hub is not operating properly.
The server is not operating properly.
POP3 server name of the POP3 user
SMTP server name
10-35
Reference
Page
page 5-37
Refer to FAX
Operation
Guide.
page 2-33
page 2-33
page 2-33
Refer to FAX
Operation
Guide.
page 2-33
page 2-33
page 2-33
—
—
—