Utax 3005ci User Manual page 169

Printing from PC > Banner printing
3
2
Attach the banner tray to the multi purpose tray.
Opening
Fit the openings on the sides of the banner tray onto the tabs on the sides of the multi purpose tray,
and press into place.
Load paper.
1
Open the paper width guides on the multi purpose tray to the maximum width.
Make sure that the banner tray is attached so that the paper width guides on the banner tray are
outside the paper width guides on the multi purpose tray.
2
Load banner paper so that it passes under the paper clamp bar.
Paper clamp
4-11