A-12
7. Adjust the End Condition Parameters (Optional)
The end condition parameters can be adjusted to define how the welding machine will respond at
the end of a weld application.
To view the end condition window, click on the
Adjust the end condition parameters to accommodate your welding application and per the
following parameter descriptions.
END AMPS
End amps: Adjust this parameter to establish the peak amperage of the wire conditioning pulse.
The wire conditioning pulse knocks the last weld droplet from the electrode at the end of a weld.
End time: Adjust this parameter to set the duration of the ending pulse.
Amp • Time: This parameter indicates the power of the ending pulse.
PULSE WAVE SHAPING PRINCIPLES
END
TIME
WAVE DESIGNER
Appendix A
button on the Waveform Editor screen.
End Conditioning
End Conditioning
For Wire Feed Speed
550.0
End Amp
2.5
End Time
1375.0
Amp * Time
50
27850037