Advertisement
Appendix A
6. Adjust the Shorting Control Parameters (Optional)
The shorting control parameters can be adjusted to define how the welding machine will respond
when the arc shorts to the weld puddle.
To view the shorting control window, click on the
Adjust the shorting control parameters to accommodate your welding application and per the
following parameter descriptions.
PINCH CURRENT
RISE PLATE
AMPS
VOLTS
SHORT
DETECT
VOLTS
Short detect voltage: Adjust this parameter to set the detect voltage level that will start the
shorting response.
Pinch current rise rate (shorting response): Adjust this parameter to set the current rise rate that
will be used to clear a short.
Arc reestablish volts: Adjust this parameter to set the detect voltage level that will end the
shorting response.
PULSE WAVE SHAPING PRINCIPLES
WAVE DESIGNER
button on the Waveform Editor screen.
Shorting Control
For Wire Feed Speed
Pinch Current Rise Rate
ARC
REESTABLISH
Arc Restablish Volt
VOLTS
A-11
Shorting Control
50
5
Short Detect Volt
55.18
15
27850036
Advertisement
