Wlan Antenna Cables - HP ENVY Notebook Maintenance And Service Manual

WLAN antenna cables

Description
WLAN antennas
Before removing the antenna cables:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the display panel (see
6. Remove the service cover (see
7. Remove the hard drive (see
8. Remove the memory modules (see
9. Remove the WLAN module (see
10. Remove the optical drive (see
11. Remove the base enclosure (see
12. Remove the top cover (see
Remove the WLAN antenna cables:
62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 33).
Display panel on page
Service cover on page
Hard drive on page
Memory modules on page
WLAN module on page
Optical drive on page
Base enclosure on page
Display hinges and top cover on page
45).
34).
34).
37).
38).
41).
50).
58).
Spare part numbers
720222-001