Yamaha RX-V1800 Service Manual

Yamaha RX-V1800 Service Manual

Av receiver/av amplifier
Hide thumbs Also See for RX-V1800:
Table of Contents

Advertisement

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING:
IMPORTANT:
I CONTENTS
To Service Personnel .......................................... 2
Front Panels ........................................................ 3–4
Rear Panels .......................................................... 5–8
Remote Control Panels ...................................... 9
Internal View ......................................................... 14
..................................... 20–33
1 0 1 0 6 3
AV RECEIVER/AV AMPLIFIER
RX-V1800/HTR-6190/
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
................................ 10–13
.......... 14–20
34–70
2007
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
DSP-AX1800

SERVICE MANUAL

IMPORTANT NOTICE
Display Data ........................................................... 72
Ic Data ................................................................. 73–84
Block Diagrams .............................................. 85–87
Printed Circuit Boards .............................. 88–115
Pin Connection Diagrams ........................ 116–118
Schematic Diagrams .................................. 119–137
Replacement Parts List .......................... 139–174
REMOTE CONTROL .......................................... 175–178
All rights reserved.
71
179–181
P.O.Box 1, Hamamatsu, Japan
'07.08

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha RX-V1800

  • Page 1: Service Manual

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2 RX-V1800/HTR-6190/DSP-AX1800 I TO SERVICE PERSONNEL AC LEAKAGE WALL EQUIPMENT TESTER OR 1. Critical Components Information OUTLET UNDER TEST EQUIVALENT Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)
  • Page 10: Specifications

    RX-V1800/HTR-6190/DSP-AX1800 I SPECIFICATIONS I Audio Section / Headphone Jack Rated Output/Impedance / Minimum RMS Output Power (Power Amp. Section) / (20 Hz to 20 kHz) CD, etc. (1 kHz, 40 mV, 8 ohms) ..... 150 mV / 100 ohms FRONT L/R U, C, R, T, K, A, B, G, E, L models (0.04 % THD, 8 ohms)
  • Page 11 Batteries (R03, AAA, UM-4) x 6 (RX-V1800: U, C, R, T, K, A, Mono ..................0.2 % B, L models) / x 4 (RX-V1800: G, E models / HTR-6190: C, G models Stereo ..................0.3 % / DSP-AX1800: J model), Indoor FM antenna x 1, AM loop antenna x...
  • Page 12 RX-V1800/HTR-6190/DSP-AX1800 • SELECT MENU CLASSICAL Hall in Munich Hall in Vienna Hall in Amsterdam Church in Freiburg Chamber LIVE/CLUB Village Vanguard Warehouse Loft Cellar Club The Roxy Theatre The Bottom Line ENTERTAINMENT Sports Action Game Roleplaying Game Music Video Recital/Opera...
  • Page 13 RX-V1800/HTR-6190/DSP-AX1800...
  • Page 14: Internal View

    RX-V1800/HTR-6190/DSP-AX1800 I INTERNAL VIEW I DISASSEMBLY PROCEDURES • Top view (Remove parts in the order as numbered.) Disconnect the power cable from the AC outlet. Power Transformer POWER (4) P.C.B. 1. Removal of Top Cover POWER (2) P.C.B. (R, L models) TUNER a.
  • Page 15 RX-V1800/HTR-6190/DSP-AX1800 CB970 CB12 CB807 CB806 CB805 CB971 Fig. 2 When checking the FL P.C.B.: • Place the sub chassis unit on top of the rubber sheet and cloth. (Fig. 3) • Reconnect all cables (connectors) that have been dis- connected. Be sure to use the extension cable before servicing the following section.
  • Page 16 RX-V1800/HTR-6190/DSP-AX1800 4. Removal of D-VIDEO P.C.B. a. Remove 2 screws (8) and screw (9). (U, C, T, B, G, E models) (Fig. 4) b. Remove the shield case cover. (U, C, T, B, G, E models) (Fig.4) c. Remove 3 screws (0). (Fig. 4) d.
  • Page 17 RX-V1800/HTR-6190/DSP-AX1800 U, C, R, T, K, A, B, G, E, L models (R, L models) (U, C, R, T, A, B, G, E, L models) J model Fig. 6...
  • Page 18 RX-V1800/HTR-6190/DSP-AX1800 When checking the D-VIDEO and A-VIDEO P.C.B.s: • Put the rubber sheet and cloth over the equipment. Then place the P.C.B.s upside down on the cloth and check it. (Fig. 7) • Reconnect all cables (connectors) that have been dis- connected.
  • Page 19 RX-V1800/HTR-6190/DSP-AX1800 6. Removal of Rear Unit FUNCTION (1) P.C.B. Rear unit a. Remove 11 (U, C, T, A, B, G, E models) / 13 (R, L mod- DSP P.C.B. els) screws (D) and 4 (U, C, R, T, A, B, G, E, L models) MF126500 / 2 (K model) screws (E).
  • Page 20: Updating Firmware

    RX-V1800/HTR-6190/DSP-AX1800 I UPDATING FIRMWARE / Note) Updating the firmware will initialize parameters, When checking the Amp Unit: system memory, tuner presetting, etc. to the • Place the sub chassis unit on top of the rubber sheet original factory settings. and cloth. (Fig. 11) •...
  • Page 21 RX-V1800/HTR-6190/DSP-AX1800 When COAXIAL IN terminal is used / Main unit / DVD/CD player / Digital audio pin cable Fig. 1 2. Reconnect the power cable of DVD/CD player to the AC outlet. 3. Press the “MASTER ON/OFF” key of the main unit to set it to the ON state.
  • Page 22 RX-V1800/HTR-6190/DSP-AX1800 5. Press the “POWER ON/OFF” key of DVD/CD player to turn on the power. 6. Press the “EJECT” key of the DVD/CD player to open the tray. 7. Put the firmware CD on the tray and close the tray.
  • Page 23: Required Tools

    RX-V1800/HTR-6190/DSP-AX1800 Writing method using PC (RS232C) G Required tools • Windows 98/2000/Me/XP, PC with a serial port (RS232C) • Firmware downloader program DSP_FLASHER_Vx800_v1.0.exe • Firmware For microprocessor: V18Mxxxx.mot For video : V18V_xxxx.mot For DSP (TI) : Vx800a_data1_verxxxxx.hex • RS232C cross cable “D-sub 9 pin female”...
  • Page 24 RX-V1800/HTR-6190/DSP-AX1800 G Connection procedures Disconnect the power cable of the main unit from the AC outlet. 1. Set the switch (SW301) of RS232C conversion adapter to the “FLASH UCOM” side. (Fig. 4) 2. Connect the writing port of the main unit to the serial port (RS232C) of the PC as shown below.
  • Page 25 RX-V1800/HTR-6190/DSP-AX1800 G Operation procedure Select the Micom • Writing to MAIN and VIDEO 1. Start up “DSP_FLASHER_Vx800_v1.0.exe” of Press [open] button to open the window the PC. (Fig. 5) 2. Select “Main/Video”. (Fig. 5) Select the firmware Select the port of RS-232C to use and press the [connect] button Fig.
  • Page 26 RX-V1800/HTR-6190/DSP-AX1800 5. Press the “MASTER ON/OFF” key of the main 8. After writing is completed, <CheckSum result> unit to turn it on. (Fig. 8) is displayed. (Fig. 10) 6. For writing to MAIN, while pressing the “AUDIO 9. Disconnect the power cable of the main unit SELECT”...
  • Page 27 RX-V1800/HTR-6190/DSP-AX1800 • Confirmation of firmware version and checksum Confirm the firmware is updated successfully with the self-diagnostic function. For more information, refer to “SELF-DIAGNOS- TIC FUNCTION”. • Version of MAIN (Menu no. 29-1) • Checksum of MAIN (Menu no. 29-2) •...
  • Page 28 RX-V1800/HTR-6190/DSP-AX1800 • Writing to DSP 1. Start up “DSP_FLASHER_Vx800_v1.0.exe” of the PC. (Fig. 13) 2. Select “DSP”. (Fig. 11) Fig. 11 3. Select the RS232C port (COMx) being set on the PC side and press the [connect] button, and <connected> appears as [Com Port Status].
  • Page 29 RX-V1800/HTR-6190/DSP-AX1800 5. Press the [RDY] button. (Fig. 12) The writing ready state will be set. Press [open] button to open the window Select “Vx800a_data1_verxxxxx.hex” Select the port of RS-232C to use and press the [connect] button Fig. 12 6. Press the “MASTER ON/OFF” key of the main unit to turn it on.
  • Page 30 RX-V1800/HTR-6190/DSP-AX1800 After about 3 seconds, writing is started auto- matically. (Fig. 14) If writing is not started, press the [CANCEL] button and perform Steps 1 to 7 of the pro- cedure “Writing to DSP” again. Writing ready state / During downloading / Fig.
  • Page 31 RX-V1800/HTR-6190/DSP-AX1800 After confirming the firmware version and checksum, press the [EXIT] button and end “DSP_FLASHER_Vx800_v1.0.exe”. (Fig. 15) 29-6. DSP VERSION 29.ROM VER/SUM TI-VER.05.09r4 29-7. DSP SUM 29.ROM VER/SUM TiSUM:C0117A0C Check that the checksum is the same Execute exit after confirmation.
  • Page 32 RX-V1800/HTR-6190/DSP-AX1800 Writing method using USER mode G Required tools • DVD or CD Player with DIGITAL OUTPUT (OPTI- CAL or COAXIAL) terminal • Optical cable (when OPTICAL terminal is used) • Digital audio pin cable (when COAXIAL terminal is used) •...
  • Page 33 RX-V1800/HTR-6190/DSP-AX1800 G Confirmation of firmware version and checksum 1. Press the “MASTER ON/OFF” key of the main unit "MASTER ON / OFF" key while simultaneously pressing the “STRAIGHT” key of the main unit. Then the ADVANCED SETUP mode is activated. (Fig. 19) 2.
  • Page 34 RX-V1800/HTR-6190/DSP-AX1800 I SELF-DIAGNOSTIC FUNCTION / There are 29 main menu items, each of which has sub- menu items. Listed in the table below are menu items and sub-menu items. MAIN MENU SUB-MENU INPUT SELECT MAIN MENU SUB-MENU INPUT SELECT DSP THROUGH 1.
  • Page 35 RX-V1800/HTR-6190/DSP-AX1800 MAIN MENU SUB-MENU INPUT SELECT 2. HDMI IN 1 – 3. HDMI IN 2 – 4. HDMI IN 3 – 5. HDMI IN 4 – HDMI UP CONV. 1. HDMI DECODER – 2. HDMI YGV ( – Not applied to these models. / 3.
  • Page 36 RX-V1800/HTR-6190/DSP-AX1800 • Starting Self-Diagnostic Function Press the “MASTER ON/OFF” key while simultaneously pressing those two keys of the main unit as indicated in the figure below. Keys of main unit Turn on the power while pressing these keys. • Starting Self-Diagnostic Function in the...
  • Page 37 RX-V1800/HTR-6190/DSP-AX1800 • Display provided when Self-Diagnostic Function started The FL display of the main unit displays the protection function history data and the version (1 alphabet) then the main menu (sub-menu of main menu No. 1 DSP THROUGH) a few seconds later.
  • Page 38 RX-V1800/HTR-6190/DSP-AX1800 When there is a history of protection function due to abnormal voltage in the power supply section DIAGNOSTIC PSx PRT:000 A/D conversion value of voltage Cause: The voltage in the power supply section is abnormal. Supplementary information: The abnormal voltage is displayed in based on 5V as 255.
  • Page 39 RX-V1800/HTR-6190/DSP-AX1800 • History of protection function When the protection function has worked, its history is stored in memory with a backup. Even if no abnormality is noted while servicing the unit, an abnormality which has occurred previously can be defined as long as the backup data has been stored.
  • Page 40 RX-V1800/HTR-6190/DSP-AX1800 • Functions in Self-Diagnostic Function mode In addition to the self-diagnostic function menu items, functions listed below are available. • Input selection, Multi channel input • Center/Rear/Rear center/Sub-woofer level adjustment • Muting • Power on/off • Master volume Functions related to the tuner and the set menu are not available.
  • Page 41 RX-V1800/HTR-6190/DSP-AX1800 • Details of Self-Diagnostic Function menu With full-bit output specified in some modes, it is possible to execute 0dBFS output without head margin in each channel. 1. DSP THROUGH This function is for DSP2 only. Main DSP of DSP2 is selected for FRONT output.
  • Page 42 RX-V1800/HTR-6190/DSP-AX1800 2. BYPASS ANALOG BYPASS 2.BYPASS ANALOG BYPASS INPUT: DVD ANALOG SPEAKER OUT: 1kHz, SUBWOOFER OUTPUT: 50Hz SPEAKER OUT SUBWOOFER Input level Volume OUTPUT FRONT CENTER SURROUND SURROUND BACK PRESENCE Both ch, -20 dBm +6.5 dB +12.5 dBm -∞ -∞...
  • Page 43 RX-V1800/HTR-6190/DSP-AX1800 3. NO MENU Not applied to these models. 4. HDMI AUDIO The audio signals input to HDMI IN are selected by the sub-menu and output. When selecting DSD or DSD Direct, be sure to con- nect an HDMI unit with DSD output function.
  • Page 44 RX-V1800/HTR-6190/DSP-AX1800 The analog switch settings for each sub-menu are as shown in the table below. SUB MENU FL/FR CENTER SL/SR SBL/SBR LFE/BASS 1. FRONT: SMALL 0dB SMALL LARGE LARGE LARGE SWFR 2. LFE/B: FRNT LARGE LARGE LARGE LARGE FRONT 3. Pres Mix: 5ch...
  • Page 45 RX-V1800/HTR-6190/DSP-AX1800 6. MULTI CH INPUT It is possible to select the 6ch/8ch input and 6-ohm/8- ohm by using the sub-menu. 6CH INPUT_6-ohm 6.Multi INPUT 6ch INPUT_6Ω INPUT: MULTI CH INPUT SPEAKER OUT: 1kHz, SUBWOOFER OUTPUT: 50Hz SPEAKER OUT SUBWOOFER Input level...
  • Page 46 RX-V1800/HTR-6190/DSP-AX1800 TMP TEST/AMP. POWER CONTROL TMP TEST: TMP TEST, TM1 and TM2 are displayed. AMP. POWER CONTROL: Select the power relay H/M/L using the “STRAIGHT” key. 6.Multi INPUT 255000045046:H TMP TEST Display RY250 (MAIN P.C.B.) RY251 (MAIN P.C.B.) H (HIGH)
  • Page 47 RX-V1800/HTR-6190/DSP-AX1800 8. FL/OSD CHECK Use this program to check the FL display section and image control section. When checking the image con- trol section, prepare a monitor, HDMI cable, compo- nent video cable, S video cable and video pin cable and connect them.
  • Page 48 RX-V1800/HTR-6190/DSP-AX1800 Check of the Video control circuit. (Monitor out) / The image signal is output as follows. Initial display/Video conversion ON Video conversion ON Input Output HDMI COMPONENT VIDEO S VIDEO VIDEO Through Video conversion Video mute/Video conversion OFF Video conversion OFF...
  • Page 49 RX-V1800/HTR-6190/DSP-AX1800 9. MANUAL TEST The noise generator with a built-in DSP outputs the test noise through the channels specified by the sub- menu. The noise frequency for LFE is 30 to 80 Hz. Other than that, the noise frequency is 500 to 2 kHz.
  • Page 50 RX-V1800/HTR-6190/DSP-AX1800 HARD FLOW This sub-menu is used to check operation of the flow port of the hardware. “OK” appears when the check result is satisfactory and “NG” when it is not. 10.RS-232C HARD FLOW: 11.AD DATA CHECK This menu is used to display the A/D conversion value...
  • Page 51 RX-V1800/HTR-6190/DSP-AX1800 TM1/TM2 (temperature detection) Temperature detected value (Normal value: 10 to 83) (Normal value: 10 to 78) L model TM1: Detects the temperature of the heat sink at the left side (power transformer side) TM2: Detects the temperature of the heat sink at the right...
  • Page 52 ±4. In this case, check the constant of partial pressure resistor, solder condition, etc. Refer to table. (Reference voltage: 5V=255) 11.AD CHECK K0:255 K1:255 RX-V1800/HTR-6190 (U, C, R, T, K, A, B, G, E, L models) DSP-AX1800 (J model) Display Display SLEEP STRAIGHT/EFFECT...
  • Page 53 RX-V1800/HTR-6190/DSP-AX1800 12.XM STATUS (U, C models) The output check of XM Radio Antenna is executed. 1k -1dB/44.1k The test tone (1kHz, -1dB/44.1kHz) is output. 12.XM STATUS 1k - 1dB/44 1k -61dB/44.1k The test tone (1kHz, -61dB/44.1kHz) is output. 12.XM STATUS 1k -61dB/44 Mute /44.1k...
  • Page 54 RX-V1800/HTR-6190/DSP-AX1800 ISO Tone/32k The ISO tone (32kHz) is output. 12.XM STATUS ISO Tone/32 XM/DT Bus Power: OFF The power of XM module is turned off. 12.XM STATUS Bus Power:OFF 13.IF STATUS (Input function status) Using the sub-menu, the status data is displayed one after another in the hexadecimal notation.
  • Page 55 RX-V1800/HTR-6190/DSP-AX1800 14.iPod This menu is used to test the DOCK connector without the iPod itself. After turning off the power, short be- tween pins No. 14 (TX) and No. 18 (RX), between pins No. 1 (PWR) and No. 17 (ACCPOW) and between pins No.
  • Page 56 RX-V1800/HTR-6190/DSP-AX1800 15.NET CHECK Not applied to these models. IP Address Check 15.NET CHECK IP CHECK: MAC Address Check 15.NET CHECK MAC CHECK: 16.USB CHECK Not applied to these models. USB 1track 16.USB CHECK USB 1 TRACK USB 2track 16.USB CHECK...
  • Page 57 RX-V1800/HTR-6190/DSP-AX1800 17.PROTECTION HIST. The history of protection function is displayed. After selecting the sub-menu, press the “STRAIGHT” key, and the history will be erased. Last 17.PRTCT HIST. Last :NO PROT History1 17.PRTCT HIST. Hist1:NO PROT History2 17.PRTCT HIST. Hist2:NO PROT History3 17.PRTCT HIST.
  • Page 58 RX-V1800/HTR-6190/DSP-AX1800 19.D-VIDEO P.C.B. CHECK Whether the bus of D-VIDEO P.C.B. is connected properly or not is self-diagnosed. ALL Check The synthetic judgment result is displayed. : No error detected : An error is detected No Check : Detection is not executed 19.DVIDEO CHK...
  • Page 59 The product ID of this unit written in HDMI module is displayed. 3116: RX-V1800 3117: HTR-6190 20.HDMI INFO HPI:3116 HDMI Vendor Name The vendor name (YAMAHA) of this unit written in the HDMI module is displayed. 20.HDMI INFO HVN:YAMAHA 21.HDMI SELECT HDMI NONE HDMI input is not selected.
  • Page 60 RX-V1800/HTR-6190/DSP-AX1800 HDMI IN 3: HDMI IN 3 Port The HDMI device connected to HDMI IN 3 terminal is selected for input and HDMI is reproduced. With the audio input terminal selection set to HDMI (Fix), it is selected automatically according to the audio format which is used for HDMI input.
  • Page 61 RX-V1800/HTR-6190/DSP-AX1800 22.HDMI UP CONV. The image signal is converted and output to HDMI OUT as follows. HDMI DECODER 22.HDMI UPCONV HDMI DECODER IC145 IC123 IP00C772 ADV7342 HDMI YGV Not applied to these models. 22.HDMI UPCONV HDMI YGV HDMI I/P 22.HDMI UPCONV...
  • Page 62 RX-V1800/HTR-6190/DSP-AX1800 HDMI 720p 22.HDMI UPCONV HDMI 720p HDMI 720p Scalar (720p up scaling) DVIDEO IC170 ABT1010 IC123 ADV7342 IC145 IP00C772 HDMI 1080p 22.HDMI UPCONV HDMI 1080p HDMI 1080p Scalar (1080p up scaling) DVIDEO IC170 ABT1010 IC123 ADV7342 IC145 IP00C772 HDMI SMART ZOOM 22.HDMI UPCONV...
  • Page 63 RX-V1800/HTR-6190/DSP-AX1800 23.VIDEO The image signal is converted and output as follows. DIGITAL THR COMP The image signal 480P/580P is not output at S-VIDEO output and COMPOSITE output terminals. 23.VIDEO DIGITAL COMP IC145 IC123 IP00C772 ADV7342 DIGITAL THR CVBS 23.VIDEO DIGITAL CVBS...
  • Page 64 RX-V1800/HTR-6190/DSP-AX1800 DIGITAL THR Y/C 23.VIDEO DIGITAL Y/C IC145 IC123 IP00C772 ADV7342 DIGITAL BYPASS 23.VIDEO DIGITAL BYPASS IC145 IC123 IP00C772 ADV7342 ANALOG BYPASS 23.VIDEO ANALOG BYPASS IC145 IC123 IP00C772 ADV7342...
  • Page 65 RX-V1800/HTR-6190/DSP-AX1800 TEST PATTERN 23.VIDEO TEST PATTERN IC123 TEST Pattern (480i/576i) IC145 IC123 IP00C772 ADV7342 VIDEO INFO Displays the information of image signals being input. 23.VIDEO VIDEO IN ---- 24.NO MENU Not applied to these models. 24.NO MENU Invalidity...
  • Page 66 RX-V1800/HTR-6190/DSP-AX1800 25.Firm UPDATE Select this when writing the firmware. (Not applied to these models.) MAIN 25.Firm UPDATE MAIN VIDEO 25.Firm UPDATE VIDEO 25.Firm UPDATE NET/USB 25.Firm UPDATE NET/USB UPDATE 26.SET INFO The information on the model and destination is dis- played.
  • Page 67 RX-V1800/HTR-6190/DSP-AX1800 27.SOFT SW This menu is used to switch the function settings on P.C.B. through the software so as to activate the prod- uct. The protection function follows the P.C.B. settings. When connected to AC or in the maker preset state, the unit is initialized to the P.C.B.
  • Page 68 RX-V1800/HTR-6190/DSP-AX1800 RDS EXIST: EXIST/NOT EXIST or NOT can be selected. EXIST (B, G, E models) (U, C, R, T, K, A, L, J models) 27.SOFT SW : NOT XM EXIST: EXIST/NOT EXIST or NOT can be selected. EXIST (U, C models) (R, T, K, A, B, G, E, L, J models) 27.SOFT SW...
  • Page 69 RX-V1800/HTR-6190/DSP-AX1800 28.FACTORY PRESET This menu is used to reserve and inhibit initialization of the back-up RAM. The signals are processed using EFFECT OFF. (The L/R signal is output using ANA- LOG MAIN BYPASS.) PRESET INHIBIT (Initialization inhibited) / 28.FAC PRESET RAM initialization is not executed.
  • Page 70 RX-V1800/HTR-6190/DSP-AX1800 29.ROM VER/SUM The version and checksum are displayed. The signal is processed using EFFECT OFF. The checksum is ob- tained by adding the data at every 8 bits for each pro- gram area and expressing the result as a 4-figure hexadecimal data.
  • Page 71: Amp Adjustment

    RX-V1800/HTR-6190/DSP-AX1800 I AMP ADJUSTMENT FRONT Confirmation of Idling Current of Amp Unit • Right after power is turned on, confirm that the voltage FRONT Rch across the terminals of R CENTER FRONT Lch SURROUND R468 ( ), R469 (FRONT Rch), R470...
  • Page 72: Display Data

    RX-V1800/HTR-6190/DSP-AX1800 I DISPLAY DATA G ANODE CONNECTION G V9001 : HNA-16ML13T (FL P.C.B.) 1GA-14GA 15GA 16GA 1GB-14GB 15GB 1-1A 1-1B 2-1A 2-1B PATTERN AREA 3-1A 3-1B 4-1A 4-1B 5-1A 5-1B 1-2A 1-2B G PIN CONNECTION 2-2A 2-2B 3-2A 3-2B Pin No.
  • Page 73 RX-V1800/HTR-6190/DSP-AX1800 I IC DATA IC182: M30845MW-001-GP (D-VIDEO P.C.B) Single chip 16/32-bit microprocessor Port P0 Port P1 Port P2 Port P3 Port P4 Port P5 Port P6 < > < > Peripheral Functions Clock Generation Circuit A/D Converter: 1 circuit Timer (16 bits)
  • Page 74 RX-V1800/HTR-6190/DSP-AX1800 Function Name Port Name Detail of Function (P.C.B.) P96/SDA4 SDAL I/O signal of I2C SDA (for 100kHz device) P95/CLK4 P94/DA1/TB4in LPFCTL LPF fs select P93/TB3in YGV VS output, spare P92/SDA3 SDAH I/O signal of I2C SDA (for HDMI device)
  • Page 75 RX-V1800/HTR-6190/DSP-AX1800 Function Name Port Name Detail of Function (P.C.B.) P132 DDCENB HDMI DDC enable control Vcc2 3.3V 3.3V P131 AUPAUD Audio passage to HDMI, output select P130 HPDENB Whether to return HPD to Source or not P53/BCLK DON’T USE L output fixed...
  • Page 76 RX-V1800/HTR-6190/DSP-AX1800 Function Name Port Name Detail of Function (P.C.B.) P110 /ICV /IC signal to VDEC P03/D3 Data bus P02/D2 Data bus P01/D1 Data bus P00/D0 Data bus P157 VTEST1 Output of self-check result, for product testing (Video) P156 VTEST2 Output of self-check result, for product testing (Video)
  • Page 77 RX-V1800/HTR-6190/DSP-AX1800 IC402: M3087BFKBGP (FUNCTION P.C.B) Microprocessor Port P0 Port P1 Port P2 Port P3 Port P4 Port P5 Port P6 < > < > Peripheral Functions Clock Generation Circuit A/D Converter: 1 circuit Timer (16 bits) Standard: 10 inputs COUT...
  • Page 78 RX-V1800/HTR-6190/DSP-AX1800 Function Name Port Name Port I/O Detail of Function (P.C.B.) TXD4 TXDH Data transmission to VIDEO_CPU CLK4 CLKH Clock transmission to VIDEO_CPU LMTCNT Limiter control output TB3in/DA0 HDMINT HDMI MUTE input SDA3/TXD3/TB2in TXDi iPod asynchronous serial data input SCL3/RXD3/TB1in...
  • Page 79 RX-V1800/HTR-6190/DSP-AX1800 Function Name Port Name I/O [OFF] Detail of Function (P.C.B.) P132 DTZEV ZONE tone control IC serial transmission data (U, C, R, T, K, A, B, G, E, L models) P131 /CEZEV0 ZONE tone control chip selector (U, C, R, T, K, A, B, G, E, L models)
  • Page 80 AD power limiter output level detect Vref VREF Avcc AVCC RXD4 RXDH Data reception from VIDEO_CPU RX-V1800 (U, C, R, T, K, A, B, G, E, L models) Key input(A-D) pull-up resistance 10 k-ohms +1.2k +1.2k +1.8k +2.7k +3.3k +4.7k +8.2k...
  • Page 81 RX-V1800/HTR-6190/DSP-AX1800 IC534, 567: D70YE101BRFP266 (DSP P.C.B.) Decoder/Post processor * No replacement part available. / SPI0_SIMO EM_CKE SPI0_SOMI/I2C0_SDA EM_CLK AXR0[0] EM_WE_DQM[1] AXR0[1] EM_D[8] AXR0[2] AXR0[3] EM_D[9] EM_D[10] AXR0[4] AXR0[5]/SPI1_SCS EM_D[11] AXR0[6]/SPI1_ENA AXR0[7]/SPI1_CLK EM_D[12] EM_D[13] EM_D[14] AXR0[8]/AXR1[5]/SPI1_SOMI EM_D[15] AXR0[9]/AXR1[4]/SPI1_SIMO EM_D[0] AXR0[10]/AXR1[3] EM_D[1]...
  • Page 82 RX-V1800/HTR-6190/DSP-AX1800 Function Name TYPE PULL GPIO Detail of Function Ground(Vss) AHCLKX0/AHCLKX2 McASP0 and McASP2 transmit master clock AMUTE0 McASP0 mute output AMUTE1 McASP1 mute output AHCLKX1 McASP1 transmit master clock Ground(Vss) ACLKX1 McASP1 transmit bit clock Core Supply (CVpp) ACLKR1...
  • Page 83 RX-V1800/HTR-6190/DSP-AX1800 Function Name TYPE PULL GPIO Detail of Function EM_D[14] EMIF data bus [lower 16-Bits] Core Supply (CVpp) EM_D[13] EMIF data bus [lower 16-Bits] EM_D[12] EMIF data bus [lower 16-Bits] IO Supply (DVpp) EM_D[11] EMIF data bus [lower 16-Bits] Ground(Vss)
  • Page 84 RX-V1800/HTR-6190/DSP-AX1800 Function Name TYPE PULL GPIO Detail of Function SPI0_SOMI/I2C0_SDA SPI0 data pin slave out master in or I2C0 serial data IO Supply (DVpp) AXR0[0] McASP0 serial data 0 Ground(Vss) AXR0[1] McASP0 serial data 1 AXR0[2] McASP0 serial data 2...
  • Page 85 RX-V1800/HTR-6190/DSP-AX1800 I BLOCK DIAGRAMS AUDIO SECTION BLOCK DIAGRAM IN 1 IC107,108 BD/HD DVD EQUALIZER MPCM/DSD 1442 IC101 • See page 119-121 → IN 2 Sil9135 IC103 ADSDO SCHEMATIC DIAGRAM IN 3 EQUALIZER DTV/CBL 1442 DSD Direct IC104 D-VIDEO IN 4 •...
  • Page 86 RX-V1800/HTR-6190/DSP-AX1800 VIDEO SECTION BLOCK DIAGRAM HDMI A-VIDEO D-VIDEO Pb/Cb MONITOR OUT • See page 129, 130 → • See page 131-135 → Pr/Cr SCHEMATIC DIAGRAM Equalizer Equalizer SCHEMATIC DIAGRAM 1442AR 1442AR IC103 IC104 POWERSAVE /VMT MONITOR OUT /MTMON Pb/Cb IC203...
  • Page 87 RX-V1800/HTR-6190/DSP-AX1800 CONTROL/POWER SECTION BLOCK DIAGRAM • See page 128 → POWER SCHEMATIC DIAGRAM POWER TRANSFORMER RY251 RY250 AC IN • See page 127 → MAIN SCHEMATIC DIAGRAM RYBL RYBM 2SD2014 +12T 2SD2014 +5D2 POWER POWER DETECT DETECT IC1,2,3 /RESET RESET...
  • Page 88 RX-V1800/HTR-6190/DSP-AX1800 I PRINTED CIRCUIT BOARDS DSP P.C.B. (Side A) DIGITAL INPUT DIGITAL OUTPUT COAXIAL OPTICAL U, C models DOCK BD/HD DVD DTV/CBL CD-R MD/TAPE CB501 CB502 OPERATION (3) (CB805) • Semiconductor Location IC501 Ref no. Location Ref no. Location No replacement part available.
  • Page 89 RX-V1800/HTR-6190/DSP-AX1800 DSP P.C.B. (Side B) U, C models • Semiconductor Location Ref no. Location Ref no. Location D5301 D5602 D5302 D5603 D5303 D5604 D5306 D5605 D5308 D5606 D5309 D5607 D5310 Q5001 D5311 Q5002 D5600 Q5301 D5601 Circuit No. U, C...
  • Page 90 RX-V1800/HTR-6190/DSP-AX1800 Circuit No. U, C, R, T, K, A, L B, G, E, C4520, 4521, 4523, 4528 IC450 J4506, 4507, 4512, 4513 FUNCTION (1) P.C.B. (Side A) J4510, 4511 R4026 R4530, 4533 VIDEO U, C, R, T, K, A, B, G, E, L models...
  • Page 91 RX-V1800/HTR-6190/DSP-AX1800 FUNCTION (1) P.C.B. (Side B) J model RX-V1800, DSP-AX1800 U, C, R, T, K, A, B, G, E, L models • Semiconductor Location C4114 Ref no. Location D4004 C4089 D4005 D4006 D4007 D4008 D4009 D4010 D4011 D4012 D4013 Q4001...
  • Page 92 RX-V1800/HTR-6190/DSP-AX1800 Circuit No. U, C R, T, K, A, B, G, E, L C3601, 3610 IC310, 311 FUNCTION (2) P.C.B. (Side A) IC356 J3003-3006 J3542-3545, 3548, 3549 U, C, R, T, K, A, B, G, E, L models J3546, 3647...
  • Page 93 RX-V1800/HTR-6190/DSP-AX1800 FUNCTION (2) P.C.B. (Side B) • Semiconductor Location Ref no. Location Ref no. Location R, T, K, A, B, G, E, L models D3001 D3003...
  • Page 94 RX-V1800/HTR-6190/DSP-AX1800 OPERATION (1) P.C.B. OPERATION (2) P.C.B. (Side A) (Side A) Writing port FL (1) (W9004) CB802 (RESET) PURE DIRECT CB801 VOLUME CB803 MAIN ZONE ON/OFF INPUT FL (2) (CB971) • Semiconductor Location Ref no. Location D8001...
  • Page 95 RX-V1800/HTR-6190/DSP-AX1800 OPERATION (1) P.C.B. OPERATION (2) P.C.B. (Side B) (Side B) • Semiconductor Location Ref no. Location Q8001...
  • Page 96 RX-V1800/HTR-6190/DSP-AX1800 OPERATION (3) P.C.B. (Side A) OPTIMZER PHONES VIDEO AUX CILENT CINEMA S VIDEO VIDEO AUDIO OPTICAL OPERATION (4) (CB810) JK803 JK801 JK802 CB804 CB807 +5D1 FUNCTION (2) (W301A) (W5001) (W301B) A-VIDEO (W2002) • Semiconductor Location Ref no. Location D8011 D8013 OPERATION (4) P.C.B.
  • Page 97 RX-V1800/HTR-6190/DSP-AX1800 OPERATION (3) P.C.B. (Side B) U, C, R, T, K, A, B, G, E, L models J model IC801 IC805 • Semiconductor Location Ref no. Location D8004 D8005 D8006 D8007 OPERATION (5) P.C.B. (Side B) OPERATION (4) P.C.B. (Side B)
  • Page 98 RX-V1800/HTR-6190/DSP-AX1800 MAIN (1) P.C.B. (Side A) MAIN (2) (W256B) MAIN (2) (W252B)(W252D) MAIN (2) (W253B)(W253D) W252C BLUE W253A W253C W252A W250A W255A W258A W254A W251A W259A BROWN MAIN (4) BLACK W260A (W250B) W257A MAIN (4) YELLOW (W260B) MAIN (3) GRAY...
  • Page 99 RX-V1800/HTR-6190/DSP-AX1800 MAIN (1) P.C.B. (Side B) • Semiconductor Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location D252 D270 D289 Q250 Q262 Q317 D253 D271 D290 Q251 Q263 Q318 D254...
  • Page 100 RX-V1800/HTR-6190/DSP-AX1800 MAIN (4) P.C.B. (Side A) MAIN (2) P.C.B. (Side A) MAIN (3) P.C.B. (Side A) MAIN (1) (W274B) MAIN (1) MAIN (4) (W255A) (W263A) BLACK U, C, R, T, K, A, B, G, E, L models R596 D304 C400...
  • Page 101 RX-V1800/HTR-6190/DSP-AX1800 MAIN (4) P.C.B. (Side B) MAIN (2) P.C.B. (Side B) MAIN (3) P.C.B. (Side B) U, C, R, T, K, A, B, G, E, L models U, C, R, T, K, A, B, G, E, L models • Semiconductor Location Ref no.
  • Page 102 RX-V1800/HTR-6190/DSP-AX1800 POWER (1) P.C.B. POWER (1) P.C.B. (Side A) (Side B) POWER TRANSFORMER POWER (3) (W7A) +5D1 FL (1) (W9001) +5D1 /VPOWER POWER (3) (W3A) POWER (3) (W8A) • Semiconductor Location Ref no. Location Ref no. Location...
  • Page 103 RX-V1800/HTR-6190/DSP-AX1800 POWER (2) P.C.B. (Side A) POWER (6) P.C.B. (Side A) R, L models POWER TRANSFORMER POWER (4) (CB6) • Semiconductor Location Ref no. Location IC13 IC14 CB10 POWER TRANSFORMER POWER (5) P.C.B. (Side A) POWER (3) (W5A) POWER (5) P.C.B.
  • Page 104 RX-V1800/HTR-6190/DSP-AX1800 POWER (3) P.C.B. (Side A) POWER (1) POWER (1) (W8B) (W7B) POWER TRANSFORMER IC12 IC10 D-VIDEO (CB188) DVGNDsens POWER (1) +3.3VD (W3B) CB16 CB17 +5VD CB21 +BDV CB19 CB20 CB23 +5SDV DVGReturn DVGReturn +BAV CB18 -BAV VAGsens +6SDSP DGReturn...
  • Page 105 RX-V1800/HTR-6190/DSP-AX1800 POWER (4) P.C.B. POWER (4) P.C.B. (Side A) (Side B) POWER TRANSFORMER (U, C, T, K, A, B, G, E, J models) POWER (2) (W2A)(W2B) (R, L models) /RES PDET /LFAN • Semiconductor Location Ref no. Location Ref no. Location...
  • Page 106 RX-V1800/HTR-6190/DSP-AX1800 • Semiconductor Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location D2001 D2007 IC204 IC215 IC223 Q2641 D2002 D2008 IC205 IC218 IC224 D2003 D2009 IC206 IC219 IC225 D2004 IC201...
  • Page 107 RX-V1800/HTR-6190/DSP-AX1800 • Semiconductor Location Circuit No. U, C, R, T, K, A, B, G, E, L Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location C2501-2505 D2061 D2563 D2611 D2632 Q2541 Q2631 A-VIDEO P.C.B.
  • Page 108 RX-V1800/HTR-6190/DSP-AX1800 • Semiconductor Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location...
  • Page 109 RX-V1800/HTR-6190/DSP-AX1800 • Semiconductor Location Ref no. Location D1203 D1601 D-VIDEO P.C.B. (Side B) D1811 D1814 IC186 Q1803 D1203...
  • Page 110 RX-V1800/HTR-6190/DSP-AX1800 FL (1) P.C.B. (Side A) POWER (1) (CB12) W9001 FL (2) (CB970) OPERATION (5) HPMT (CB809) /MIC KEY1 PSWB PSWA KEY1B +5M2 BT232C KEY0 +5SPC +5D1 REM1 CEF2 CEF1 SCKN SDTN +5M2 /ICFL +5M2 OPERATION (1) (CB801) TUNING MEMORY...
  • Page 111 RX-V1800/HTR-6190/DSP-AX1800 FL (1) P.C.B. (Side B) 48 49 16 17 U, C, R, T, K, A, B, G, E, L models • Semiconductor Location Ref no. Location Ref no. Location D9005 Q9001 D9006 Q9002 D9015 Q9003 D9017 Q9004 D9021 Q9005...
  • Page 112 RX-V1800/HTR-6190/DSP-AX1800 FL (2) P.C.B. (Side A) D-VIDEO (CB186) D-VIDEO (CB102) OPERATION (2) (CB803) +5D1 PDLED KEY1B +5SPC +5M2 /RES BOOT CB953 TXDF BUSY RXDF HPMT /MIC KEY1 PSWDET PSW2 PSW1 KEY1B BT232C KEY0 +5SPC REM1 CEF2 CEF1 SCKN SDTN /ICFL...
  • Page 113 RX-V1800/HTR-6190/DSP-AX1800 FL (2) P.C.B. (Side B)
  • Page 114 RX-V1800/HTR-6190/DSP-AX1800 FL (3) P.C.B. FL (4) P.C.B. (Side A) (Side A) FUNCTION (1) (CB404) FUNCTION (1) (CB403) INPR INPR INPL INPL TPRR TPRR TPRL TPRL NETR NETR NETL NETL CB955 CB952 Z2R1 Z2R1 Z2L1 Z2L1 FUNCTION (2) FUNCTION (1) (CB351)
  • Page 115 RX-V1800/HTR-6190/DSP-AX1800 FL (5) P.C.B. (Side A) FL (6) P.C.B. (Side A) U, C, R, T, K, A, B, G, E, L models TRIGGER OUT RS-232C +12V 15mA MAX. /INTDIR /INTDIR /CSY /CSY CB968 /INTTI /INTTI SPIRDY SPIRDY /ICTI /ICTI /CSTI...
  • Page 116 RX-V1800/HTR-6190/DSP-AX1800 I PIN CONNECTION DIAGRAMS • ICs NJM4565M NJU7311AM NJW1119AV NJW1321FP1 ABT1010PQ100A ADM222ARZ ADV7342BSTZ ADV7401BSTZ-80 SN74LVC2G125DCUR NJU7312AM SiI9134CTU NJU7313AM PCM1804DBR PQ200WNA1ZPH PT6302LQ-008 R1130H181B-TI-F R1131N181D R1154H050B-T1-F R3112N421A-TR-F TC7SH08FU AK4384ET BA00JC5WT-V5 BA15218F BD3841FS CXB1442AR-T4 CD4051BNSR R1171S181B-E2-F RH5RE58AA-T1-FA S29AL016D70TFI020 SI-8008HFE R1171S331B-E2-F R1172S121D-E2-F R1172S181B-E2-F...
  • Page 117 RX-V1800/HTR-6190/DSP-AX1800 TK15420M TLP421 W9864G6GH-7 SN74AHC1G08DCKR UPC4570G2-E1-A SN74AHCT1G32DCKR • Diodes 1N4002S 1SS355 MA8240-M 1SS133,176 1SS380 MA8300-L HZS242TD MA8030-L RB501V-40 MTZJ10B MA-8039-H UDZS5.6BTE-17 MTZJ5.1C MA8043-L MTZJ6.8B MA8047 Anode MA8047-L Anode MA8051-M MA8062-M MA8068-M MA8075-M MA8130-M Cathode Cathode D15XB20 D2SBA20 D4SBS4-4101 RLS245 Anode –...
  • Page 118 RX-V1800/HTR-6190/DSP-AX1800 • Transistors µPA672T-T1-A 2SA949 2SB1257 A2151/C6011 2SK3850 2SA2168 4:Drain 2SC1815 2SB1274 2SC5291 1. Source 1 (S1) 2SC2229 2SC3852 2. Gate 1 (G1) 2SC2878 2SD2014 3. Drain 2 (D2) 4. Source 2 (S2) 5. Gate 2 (G2) 6. Drain 1...
  • Page 119 RX-V1800/HTR-6190/DSP-AX1800 SCHEMATIC DIAGRAMS DSP 1/3 Page 122 Page 126 Page 137 Page 137 to FUNCTION (1)_CB411 to OPERATION (3)_CB805 to FL (2)_CB954 to FL (2)_CB974 12.4 IC510 IC509: SN74LV157APWR DOCK Quadruple 2-line to 1-line data selectors/multiplexers IC510 IC511 -11.9 DUTY CORRECTOR...
  • Page 120 RX-V1800/HTR-6190/DSP-AX1800 DSP 2/3 Page 137 Page 137 Page 128 Page 128 to FL (5)_CB973 to FL (5)_CB959 to POWER (3)_CB16 to POWER (3)_CB17 (U, C models) IC543 IC545 IC536 -0.1 IC544 -0.1 0.2 0.2 SBL/SBR C/SW DIGITAL IN SL/SR FL/FR...
  • Page 121 RX-V1800/HTR-6190/DSP-AX1800 DSP 3/3 Page 124 Page 125 to FUNCTION (2)_CB300 to FUNCTION (2)_W3503 12.2 ANALOG IN IC575 IC585: W9864G6GH-7 FRONT L 64 M x 4 banks SDRAM CLOCK BUFFER IC569 11.5 IC561 11.5 IC575 COLUMN DECODER COLUMN DECODER -11.5 IC563...
  • Page 122 RX-V1800/HTR-6190/DSP-AX1800 FUNCTION 1/4 JK401 JK402 To TUNER IC403 CB401 (B, G, E models) 11.9 CB412 11.9 11.2 DSP-AX1800 RX-V1800 HTR-6190 -11.2 CB413 -11.2 CB402 MICROPROCESSOR Page 137 -11.2 to FL (5)_CB960 (MAIN) IC402 CB414 -11.2 CB416 Page 137 to FL (5)_CB972 -11.2...
  • Page 123 RX-V1800/HTR-6190/DSP-AX1800 FUNCTION 2/4 to FUNCTION 1/4 INPUT/ZONE3 SELECTOR -6.1 CB453 Page 137 to FL (4)_CB965 REC/ZONE2 SELECTOR -6.1 IC450, 451: BD3841FS Function switch LOGIC FUNCTION (1) F-SW1: INPUT FUNCTION 1 F-SW2: INPUT FUNCTION 2 # All voltages are measured with a 10MΩ/V DC electronic voltmeter.
  • Page 124 RX-V1800/HTR-6190/DSP-AX1800 FUNCTION 3/4 W3004 Page 128 to POWER (3)_CB20 -11.3 11.8 -11.3 11.8 11.8 -11.3 11.8 -6.5 -6.5 -6.1 -11.3 FRONT L 11.8 11.8 IC309 IC302 -6.1 -11.2 -11.2 -1.0 -6.1 IC301 IC300 IC300 -6.1 -6.1 -11.2 -11.2 IC302 IC309 -11.3...
  • Page 125 RX-V1800/HTR-6190/DSP-AX1800 FUNCTION 4/4 Page 126 Page 137 to OPERATION (3)_CB806 to FL (2)_CB967 FUNCTION (2) 11.3 IC350 IC350, 351: NJM2068MD-TE2 Dual operational amplifier –IN + – + – IC350 -11.8 –V Page 121 W3503 to DSP_CB560 IC354 IC355, 356: BD3841FS -6.1...
  • Page 126 RX-V1800/HTR-6190/DSP-AX1800 OPERATION to OPERATION (3)_CB804 CB810 OPERATION (4) IC802 ON/OFF Page 136 to FL (1)_W9004 CB801 CB805 Page 119 to DSP_W5001 IC801: NJM4565M Page 136 Dual operational amplifier CB806 to FL (1)_W9003 Page 125 to FUNCTION (2)_W301A CB812 OPERATION (1) 2, 6 –INPUT...
  • Page 127 RX-V1800/HTR-6190/DSP-AX1800 MAIN W272 W263A W276B MAIN (3) -19.6 -19.6 -19.6 -29.9 -62.4 -29.9 W264A SURROUND -62.4 W262A BACK L -29.9 W260B W265A MAIN (2) W261B W264B SURROUND L W261D W262B W257B W250B -18.3 -18.3 GRAY W276A CENTER W259B -18.3 -18.3...
  • Page 128 RX-V1800/HTR-6190/DSP-AX1800 POWER 19.3 19.3 19.1 IC1, 2: TLP421 19.1 Photo transistor Page 122 19.3 to FUNCTION (1)_CB407 17.8 CB21 Anode Collector 19.1 Cathode Emitter Page 127 19.3 17.8 to MAIN (4)_W272 19.3 17.8 19.3 -19.6 19.3 IC3: TC4013BP -19.6 -19.6 Dual D-type flip flop -19.6...
  • Page 129: Frequency Counter

    RX-V1800/HTR-6190/DSP-AX1800 A-VIDEO 1/2 Page 132 Page 132 to D-VIDEO_CB122 to D-VIDEO_CB121 IC201: NJW1321FP1 Wide band video switch with I C bus Y/R IN1 Y/R OUT1 Y/R IN2 Y/R IN3 J model Y/R IN4 Y/R OUT2 Pb/G IN1 Pb OUT2 Pb/G OUT1...
  • Page 130 RX-V1800/HTR-6190/DSP-AX1800 A-VIDEO 2/2 Page 126 to OPERATION (3)_CB807 IC218: LA73050-TLM-E 6-channel 75-ohm video driver IC219: LA7106M-TLM-E Analog dual operational amplifier VIN1+ +VCC NFB1 VOUT1 INPUT SELECTOR MUTE1 VIN2+ VOUT2 CB203 NFB2 DR CTL -VCC1 VOUT3 Page 122 VIN3+ MUTE2 to FUNCTION (1)_CB410...
  • Page 131 RX-V1800/HTR-6190/DSP-AX1800 D-VIDEO 1/5 IC113: SN74CBT3253CPWR Dual 1-of-4 fet multiplexer/demultiplexer CB101 CB103 CB104 CB105 CB106 IC101: SiI9135CTU HDMI receiver XTAL RESET# Registers & HDCP CSDA Configuration Keys MCLK CSCL Logic MCLKOUT DSDA0 DSCL0 SPDIF HDCP Rx0± Audio HDMI1.3 SD[3-0] Rx1± Decryption...
  • Page 132 RX-V1800/HTR-6190/DSP-AX1800 D-VIDEO 2/5 IC121: LA73053-TLM-E IC122: SN74LVC2G125DCUR Analog dual operational amplifier Dual bus buffer gate N.C. N.C. to D-VIDEO 3/5 N.C. N.C. VIN1 +VCC1 +Vcc DCCNT1 VOUT1 VIN2 VOUT2 MUTE1 N.C. VIN3 VOUT3 N.C. -VCC1 N.C. -VCC2 VIDEO ENCODER N.C.
  • Page 133 RX-V1800/HTR-6190/DSP-AX1800 D-VIDEO 3/5 to D-VIDEO 2/5 to D-VIDEO 4/5 to D-VIDEO 2/5, 4/5 DE-INTERLACER to D-VIDEO 5/5 IC145 IC144: W9864G6GH-7 64 M x 4 banks SDRAM CLOCK BUFFER COLUMN DECODER COLUMN DECODER CELL ARRAY CELL ARRAY BANK #0 BANK #1...
  • Page 134 RX-V1800/HTR-6190/DSP-AX1800 D-VIDEO 4/5 to D-VIDEO 1/5 164-169: SN74LVC245APWR Octal bus transceivers with 3-state outputs to D-VIDEO 3/5 to D-VIDEO 1/5 IC171-173: SN74LVTH245APW 3.3 V ABT octal bus transceivers with 3-state outputs SCALER IC170 to D-VIDEO 5/5 to D-VIDEO 3/5 IC170: ABT1010PQ100A...
  • Page 135 RX-V1800/HTR-6190/DSP-AX1800 D-VIDEO 5/5 IC182: M30845MW-001-GP Single chip 16/32-bit microprocessor Port P0 Port P1 Port P2 Port P3 Port P4 Port P5 Port P6 < > < > to D-VIDEO 3/5 Peripheral Functions A/D Converter: Clock Generation Circuit 1 circuit Timer (16-bit)
  • Page 136 RX-V1800/HTR-6190/DSP-AX1800 FL 1/2 11.2 10.5 11.2 10.9 JK951 -23.5 -23.4 -25.5 -27.5 JK952 -23.5 -20.9 -26.7 -22.9 -27.3 21.4 -27.5 -23.5 -25.3 -21.4 11.2 -27.3 -23.5 FL DRIVER -25.3 11.2 10.6 -23.3 10.9 -27.3 -25.3 -27.3 -27.5 -27.5 -25.3 -27.5 -23.5...
  • Page 137 RX-V1800/HTR-6190/DSP-AX1800 FL 2/2 Page 131 Page 135 to D-VIDEO_CB102 to D-VIDEO_CB186 CB957 CB953 CB965 CB971 CB963 FL (4) Page 120 Page 120 to DSP_CB530 to DSP_CB536 CB973 CB959 CB960 CB972 Page 122 Page 122 FL (5) CB970 to FUNCTION (1)_CB416...
  • Page 138: Replacement Parts List

    RX-V1800/HTR-6190/DSP-AX1800 I REPLACEMENT PARTS LIST • ELECTRICAL COMPONENT PARTS WARNING G Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. G The chip resistor is not supplied as a replacement part.
  • Page 139 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. DSP ✻ New Parts...
  • Page 140 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. DSP ✻ New Parts...
  • Page 141 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. DSP ✻ New Parts...
  • Page 142 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. DSP ✻ New Parts...
  • Page 143 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. DSP ✻ New Parts...
  • Page 144 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. DSP and P.C.B. FUNCTION ✻ New Parts...
  • Page 145 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. FUNCTION ✻ New Parts...
  • Page 146 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. FUNCTION ✻ New Parts...
  • Page 147 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. FUNCTION ✻ New Parts...
  • Page 148 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. FUNCTION ✻ New Parts...
  • Page 149 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. FUNCTION and P.C.B. OPERATION ✻ New Parts...
  • Page 150 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. OPERATION ✻ New Parts...
  • Page 151 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. MAIN ✻ New Parts...
  • Page 152 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. MAIN ✻ New Parts...
  • Page 153 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. MAIN ✻ New Parts...
  • Page 154 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. MAIN ✻ New Parts...
  • Page 155 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. POWER ✻ New Parts...
  • Page 156 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. POWER ✻ New Parts...
  • Page 157 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. POWER ✻ New Parts...
  • Page 158 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. POWER and P.C.B. A-VIDEO ✻ New Parts...
  • Page 159 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. A-VIDEO ✻ New Parts...
  • Page 160 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. A-VIDEO ✻ New Parts...
  • Page 161 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. A-VIDEO and P.C.B. D-VIDEO ✻ New Parts...
  • Page 162 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. D-VIDEO ✻ New Parts...
  • Page 163 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. D-VIDEO ✻ New Parts...
  • Page 164 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. D-VIDEO ✻ New Parts...
  • Page 165 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. D-VIDEO and P.C.B. FL ✻ New Parts...
  • Page 166 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. FL ✻ New Parts...
  • Page 167 RX-V1800/HTR-6190/DSP-AX1800 P.C.B. FL ✻ New Parts...
  • Page 168 RX-V1800/HTR-6190/DSP-AX1800 Carbon Resistors Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. 1.0 Ω 3100 3100 10 kΩ 7100 7100 HJ35 HF85 HF45 HF45 1.8 Ω ❊ 3180 11 kΩ 7110...
  • Page 169 RX-V1800/HTR-6190/DSP-AX1800 • OVERALL ASS’Y T, K, A, B, G, E models 4 (4) 9 (5) 9 (6) R, L models 6 (1) 9 (3) AMP Unit 9 (4) 4 (2) 6 (2) LEFT J model 9 (2) Sub Chassis Unit...
  • Page 170 RX-V1800/HTR-6190/DSP-AX1800 ✻ New Parts ✻ New Parts...
  • Page 171 RX-V1800/HTR-6190/DSP-AX1800 • ACCESSORIES RX-V1800 RX-V1800 (U, C models) (R, T, K, A, B, L models) 200-1 201-1 201-1 U, C, R, T, L, J models K, A, B, G, E models U, C, R, T, K, A, L model B, G, E, J models L model ✻...
  • Page 172 RX-V1800/HTR-6190/DSP-AX1800 • FRONT PANEL and SUB CHASSIS UNIT 2-55 2-55 2-52 2-26 2-52 2-55 2-55 2-15 2-27 2-14 2-55 2-56 2-25 2-55 2-55 2-52 2-38 2-33 2-36 2-24 2-55 2-22 2-30 2-55 2-55 2-36 2-46 2-32 2-23 2-29 2-31 2-53...
  • Page 173 RX-V1800/HTR-6190/DSP-AX1800 • AMP UNIT 3-1 (4) 3-1 (3) 3-1 (2) 3-33 3-17 3-33 3-33 3-17 3-33 3-35 3-33 3-33 3-33 3-1 (1) 3-32 3-107 3-25 3-34 3-25 3-22 ✻ New Parts...
  • Page 174 RX-V1800/HTR-6190/DSP-AX1800 I REMOTE CONTROL RAV367: U, C models RAV368: R, T, K, A, B, G, E, L, J models • SCHEMATIC DIAGRAM • PANELS RAV367 RAV368 Vbat Vbat SOURCE (U, C models) (R, T, K, A, B, G, E, L, J models)
  • Page 175 RX-V1800/HTR-6190/DSP-AX1800 • KEY NO. LAYOUT • KEY CODE Luminous or AMP Library: 2001 (default) AMP Library: 2002 Label AREA LEARN MACRO transparent MAIN ZONE2 ZONE3 MAIN ZONE2 ZONE3 – – – – – – – – – – – –...
  • Page 176 RX-V1800/HTR-6190/DSP-AX1800 • SOURCE/TV MODE KEY CODE CD-R TUNER TAPE Device Library Brand Yamaha-1 Brand Yamaha Brand Yamaha1 Yamaha2 Brand Yamaha Brand Yamaha1 Yamaha2 Yamaha3 Brand Yamaha2 Yamaha3 Yamaha4 Yamaha5 Yamaha6 Yamaha7 Yamaha8 Brand Yamaha1 Yamaha2 Brand Yamaha1 Yamaha2 Yamaha4 Yamaha5...
  • Page 177 RX-V1800/HTR-6190/DSP-AX1800 RAV29: RX-V1800 (U, C models) RAV30: RX-V1800 (R, T, K, A, B, L models) • SCHEMATIC DIAGRAM • KEY CODE Code Key name ZONE3 ZONE2 Pressing with Pressing with RAV29 RAV30 ZONE2 ZONE3 ZONE2 ZONE3 “NUMBER” key “NUMBER” key...
  • Page 178 RX-V1800/HTR-6190/DSP-AX1800...
  • Page 179 RX-V1800/HTR-6190/DSP-AX1800...
  • Page 180 RX-V1800/HTR-6190/DSP-AX1800...
  • Page 181 RX-V1800/HTR-6190/ DSP-AX1800...

This manual is also suitable for:

Htr-6190Dsp-ax1800

Table of Contents