Systems Insight Display Led Combinations - HP StoreEasy 1000 Storage Administrator's Manual

Figure 17 Drive LEDs
Item LED
1 Locate
2 Activity ring
3 Do not remove
4 Drive status

Systems Insight Display LED combinations

When the health LED on the front panel illuminates either amber or red, the server is experiencing
a health event. Combinations of illuminated Systems Insight Display LEDs, the system power LED,
and the health LED indicate system status.
Table 1 Systems Insight Display LEDs and internal health LED combinations
Systems Insight
Display LED and
color
Processor (amber)
DIMM (amber)
Status
Solid blue
Flashing blue
Rotating green
Off
Solid white
Off
Solid green
Flashing green
Flashing amber/green
Flashing amber
Solid amber
Off
Health LED System power LED
Red Amber
Amber Green
Red Green
Definition
The drive is being identified by a host application.
The drive carrier firmware is being updated or requires an
update.
Drive activity
No drive activity
Do not remove the drive. Removing the drive causes one or
more of the logical drives to fail.
Removing the drive does not cause a logical drive to fail.
The drive is a member of one or more logical drives.
The drive is rebuilding or performing a RAID migration,
stripe size migration, capacity expansion, or logical drive
extension, or is erasing.
The drive is a member of one or more logical drives and
predicts the drive will fail.
The drive is not configured and predicts the drive will fail.
The drive has failed.
The drive is not configured by a RAID controller.
Status
One or more of the following conditions may exist:
Processor in socket X has failed.
Processor X is not installed in the socket.
Processor X is unsupported.
ROM detects a failed processor during POST.
Processor in socket X is in a pre-failure condition.
One or more DIMMs have failed.
Hardware components 17