5.2 Wireless System Installation
5.2.3 Installing the Unit
The following procedures can be used to connect Cell Station Interface Unit (KX-TD144 / KX-
TD146) to the main unit, and then the Cell Station (KX-TD142) to the Cell Station Interface
Unit.
The main unit in the illustrations is the KX-TD1232.
1.
Loosen the two screws on the cover plate. Insert your fingers into the slits to remove the
cover plate(s).
Slit
Note
Any of the cover plates can be removed as required.
2.
Connect the cabinet cord of the Cell Station Interface Unit (KX-TD144 / KX-TD146) to the
connector in the main unit firmly.
152
Slit
DECT Installation