Table of Contents
Advertisement
4.2 E & M (TIE) Line Installation
4.2.2 Installing the Unit
Installing one unit to the system allows four E&M (TIE) lines to be connected to outside lines
05 through 08 for the KX-TD816, or outside lines 09 through 12 or 21 through 24 for the KX-
TD1232.
The main unit in the illustrations is the KX-TD1232.
1.
Loosen two screws on the cover plate. Insert fingers into the slits to remove the cover plate.
Slit
Note
Any of the cover plates can be removed, as needed.
2.
Connect the cabinet cord to the connector in the main unit firmly.
132
Slit
E & M Installation
Advertisement
Table of Contents
