Required Equipment - Lincoln Electric POWERFEED IM827-D Operator's Manual

b-3
PROCESS LIMITATIONS
The Power Feed™ 10M Single Wire Feeder is not
suitable for:
• SAW
• GTAW with HF
Not all weld modes or processes described in this manual are avail-
able on all Power Wave power sources.

REQUIRED EQUIPMENT

Lincoln's Power Feed™ 10M Single Wire Feeder is
designed for use with the Power Wave family of power
sources. These include:
• Power Wave 355 • Power Wave 455M CE
• Power Wave 455 • Power Wave 455M STT
• Power Feed 455/STT • Power Wave 455M STT CE
• Power Wave 455M • Power Wave 655
ADDITIONAL REQUIRED EQUIPMENT
• Drive Roll Kits
• Control Cables
• Gun and Cable Assembly
• Weld Wire
• Shielding gas
• Work Cable and Clamp
EQUIPMENT LIMITATIONS
• The Power Feed™ 10M Single Wire Feeder does
not operate with the Power Wave 450.
• The Power Feed™ 10M Single Wire Feeder does
not operate with any analog based power sources
(CV-xxx machines, DC-xxx machines, etc.)
• The Memory Panel is required to set procedure limits.
• The Boom model does not support push-pull guns
or GTAW welding.
• A push-pull gun and foot amptrol may not be
plugged into the Power Feed™ 10M Single Wire
Feeder at the same time.
OPERATION
POWER FEED™ 10M SINGLE WIRE FEEDER
b-3