Recording Continuous Timecode With Fam And Ftp Connections - Sony PDW-F800 Operation Manual

Recording Continuous
Timecode with FAM and
FTP Connections
When you are connected to the unit by FAM or
FTP, you can create new clips with timecode that
is continuous with the timecode of the last frame
of the last clip on the disc. To record continuous
timecode, set PRESET/REGEN/CLOCK switch
to "REGEN", and then proceed as follows.
FAM connection
Write clip files to the unit from the computer or
other device that is connected to this unit.
FTP connection
Use the "STOR" command to transfer clip files
from the computer that is connected to this unit. If
you issue the "SITE UMMD" command
immediately before the "STOR" command, the
original timecode of the transferred file is
recorded, regardless of the setting of PRESET/
REGEN/CLOCK switch.
242

Recording Continuous Timecode with FAM and FTP Connections