Sony PDW-F800 Operation Manual page 173

No. Page Item
11/10 SKIN DETAIL SKIN DETAIL ALL
SKIN DETECT
SKIN AREA IND
SKIN DTL SELECT
SKIN DETAIL
SKIN DETAIL LVL
SKIN DTL SAT
SKIN DTL HUE
SKIN DTL WIDTH
Settings Description
OFF/ON Turns on or off all of channels 1,
2 and 3 for the color detail
function.
Moves to color detection Executes the color detail
page. function.
OFF/ON Turns on and off the function that
displays a zebra pattern where
color was detected.
[F800]
When this is ON, a zebra pattern
is output from the following
connectors.
• SDI OUT 2 connector (when all
• TEST OUT connector (when both
[700]
When this is ON, a zebra pattern
is output from the TEST OUT
connector (when both of the
following are true: TEST OUT
SUPER on the OUTPUT 1 page
is set to ON, and
SUPER(MENU) on the SUPER
IMPOSE page is set to ON)
1/2/3 Selects the type of the color
detail function. The following
items depend on the selected type
of the color detail function.
OFF/ON Turns the color detail function on
or off for the type selected in the
above item.
(–99 to 99) Sets the level of the color detail
signal.
(–99 to 99) Adjusts the saturation level of the
hue possessed by the color detail
function.
0 to 359 Adjusts the center phase of the
hue possessed by the color detail
function.
0 to 39 to 359 Adjusts the width of the hue
possessed by the color detail
function.
of the following are true: SDI
OUT 2 SELECT on the OUTPUT
1 page is set to HDSDI, SDI OUT
2 SUPER is set to ON, and either
SUPER(MENU) or
SUPER(ZEBRA) on the SUPER
IMPOSE page is set to ON)
of the following are true: TEST
OUT SUPER on the OUTPUT 1
page is set to ON, and
SUPER(MENU) on the SUPER
IMPOSE page is set to ON)
Menu List 173