Sony PDW-F800 Operation Manual page 254

HD422 1080 This appears when mixed format
HD422 720 recording mode is disabled and the
HD420 1080 current recording format of this
HD420 720 unit does not match the recording
IMX50 Clip format of the inserted disc. To
IMX40 Clip carry out recording operations,
IMX30 Clip exchange the disc, or change the
DVCAM recording format of this unit, or
8CHx16 Clip enable mixed format recording
4CHx24 Clip mode.
2CHx16 Clip
Mixed REC! This appears when mixed format
recording mode is disabled and the
current recording format of this
unit does not match the recording
format of the inserted disc. To
carry out recording operations,
exchange the disc, or change the
recording format of this unit, or
enable mixed format recording
mode.
Index File! There is an unsupported index file
on the disc to which you are trying
to record. Exchange or format the
disc.
File System There is an unsupported file
system on the disc to which you
are trying to record. Exchange or
format the disc.
ILL. PLAY! An A/V phase error occurred
during playback. Stop the disc.
Lid Closed! The lid of the disc compartment
does not open. Check the lid.
Lid Open! The lid of the disc compartment is
not closed. Close it securely.
No Clip! There are no clips recorded on the
disc. Exchange for a recorded
disc.
No Disc! There is no disc loaded. Insert a
disc and try the operation again.
STOP ONCE! The operation is not possible
REC mode! while the disc is being played or
recorded. Stop the disc.
Loading! An operation was attempted while
Unloading! a disc was loading or unloading.
Wait for the disc to finish loading
or unloading and try again.
Disc Top! The operation is not possible
Disc End! because the disc is at the top or
end.
254 Operation Warnings
Clip Top! In single clip playback mode, the
Clip End! specified operation is not possible
because playback has reached the
top or end of the clip.
Formatting! The disc is being automatically
formatted. Wait until the format
ends.
Recording The unit is writing to the file
system. Wait until writing
finishes.
No EM Space Essence marks cannot be inserted.
EM Full! For details, see "Recording
essence marks" on page 89.
Cache REC! An attempt was made to perform
an operation that cannot be
performed when the picture cache
function is enabled. The operation
will be ignored.
Disc Exchag! An attempt was made to perform
an operation that cannot be
performed when the disc exchange
cache function is enabled. The
operation will be ignored.
SB CLP mode An essence mark or clip flag
operation was attempted while the
SUB CLIP indicator was lit. Press
the SUB CLIP/DISC MENU
button to turn the indicator off and
try again.
No SEL List No clip list is selected. Create a
new clip list, or load a clip list
from the disc.
No List! There is no clip list. Create a clip
list.
No SUB Clip There are no sub clips in the clip
list. Register a sub clip, or load
another clip list.
SUB Clip NG The In and Out point positions are
invalid. Set correct In and Out
points.
MAX# SB The total number of sub clips is
CLP over the upper limit (300).
Resolution An attempt was made to register a
clip in a clip list with a different
resolution.
CL OVER The total duration of sub clips in
DUR the current clip list is over the
upper limit (24 hours).