Sony PDW-F800 Operation Manual page 102

When sub item "AUTO NAMING" is set to
"C****"
TITLE00001.MXF
When sub item "AUTO NAMING" is set to
"TITLE"
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Before starting, set TITLE on the CLIP
TITLE page of the OPERATION menu
to ENABL and set a title (see page 99).
For details on menu operations, see "Basic
menu operations" on page 195.
2
Display the FILE NAMING page of the
OPERATION menu.
3
Select NAMING FORM and then press
the MENU knob.
4
Turn the MENU knob to display
"FREE" and then press the MENU
knob.
You can now enter a user-defined name.
028 FILE NAMING
NAMING FORM:
AUTO NAMING:
102 Advanced Operations for Shooting
C0001.MXF
TITLE00001
TITLE00001
TOP
FREE
C****
5
Turn the MENU knob to select "AUTO
NAMING" and then press the MENU
knob.
6
Turn the MENU knob to display
"TITLE" and then press the MENU
knob.
The same name will now be given to newly
recorded clips.
Notes
• An FTP client software that supports UTF-8 is
required to use Unicode characters other than ASCII
characters. Command prompt FTP commands do not
support UTF-8.
• When the first letter of the title setting on the CLIP
AUTO TITLING menu is a space or period (.), the clip
name is the title string minus the first letter.
To use clip names and clip list names by FAM
and FTP
Carry out steps 2 to 4 of "To assign clip names on
this unit" (page 101).
It is now possible to write, transfer, and rename
clips and clip lists with user-defined names over
file access mode (FAM) connections (see page
232) and FTP connections (see page 236).
Fuji.MXF
User-defined clip names can be used by FAM
and FTP
Sakura.SMI
User-defined clip list names can be used by FAM
and FTP
To set clip names by using planning
metadata
Planning metadata is a file that contains metadata
about the clips to be shot and recorded.
The following two types of clip name strings can
be written in a planning metadata file.
• The ASCII format name that appears in the
1)
viewfinder