Power Source Connection Diagrams - Lincoln Electric LN-8 SVM132-A Service Manual

A-5

POWER SOURCE CONNECTION DIAGRAMS

Figure No. Power Source
A.2 Connection of LN-8 to an Idealarc® R3S-400, 600 or 800 (with LVC) (Discontinued)
A.3 Connection of LN-8 to an Idealarc R3S-400, 600 or 800 (without LVC) (Discontinued)
A.4 Connection of LN-8 to a SAM Motor-Generator or Engine Driven Welder
A.5 Connection of LN-8 to R3S-250 and R3S-325
A.6 Connection of LN-8 to DC-600
A.7 Connection of LN-8 to DC-250, 400 and CV/CVI Power Sources
A.8 K318 Duel Process Contactor Kit
DC-400, CV-400, and CVI-500 Connection to LN-8 for Same Polarity Operation
A.9 K318 Duel Process Contactor Kit
DC-400, CV-400, and CVI-500 Connection to LN-8 for Opposite Polarity Operation
A.10 Power Sources other than Lincoln Electric
INSTALLATION
Table A.2 – LN-8 Power Source Connection Diagrams
LN-8
A-5