Lincoln Electric LN-8 SVM132-A Service Manual page 88

F-38
WIRE DRIVE ASSEMBLY AND COMPONENT REPLACEMENT
10. Using a 1/2 in. wrench, remove the
four hex head screws, lockwash-
ers and flat washers that hold the
mounting plate to the gear box
assembly, and remove the mount-
ing plate and insulation sheet.
Refer to Figure F.13.
11. Using a flat blade screwdriver,
remove the three screws, lock-
washers, flat washers and spacers
TROUBLESHOOTING AND REPAIR
FIGURE F.13 – WIRE DRIVE ASSEMBLY REMOVAL
BRUSH
BRUSH
SCREW
WIRE
DRIVE
MOTOR
GEARBOX
INSULATION
SHEET
MOUNTING
PLATE
that secure the drive motor to the
gearbox assembly, and remove
the drive motor.
12. For further disassembly of the wire
drive assembly, refer to Figure
F.13.
13. Secure the drive motor to the gear-
box assembly using three screws,
lockwashers, flat washers, and
spacers.
LN-8
F-38
(continued)