A-6
POWER SOURCE TO LN25 PRO EXTREME
CABLE CONNECTION DIAGRAMS
ACROSS THE ARC SET-UPS
CC Power Sources with Output Terminals Always
Hot (See Figure A.5)
If the power source has a Remote/Local switch, place
the switch in the Local position.
Place the CV/CC switch in the feeder in the "CC" posi-
tion.
CV
Power Sources with Stud Connectors and
Remote/Local Switch (See Figure A.6)
Place the power source Remote/Local switch in the
Local position.
Place CV/CC switch in the feeder in the "CV" position.
INSTALLATION
FIGURE A.5
K#
K2613-3
KP1695-XX
KP1696-XX
KP1697-XX
See Magnum Literature
K1803-1
FIGURE A.6
K#
K2613-3
KP1695-XX
KP1696-XX
KP1697-XX
See magnum Literature
K1803-1
LN-25 PRO EXTREME
A-6
Description
LN25 PRO EXTREME
Drive Roll Kit
Welding Gun
CC power Source
Welding Cables
Description
LN25 PRO EXTREME
Drive Roll Kit
Welding Gun
CV power Source
Welding Cables