Bench Mount; Swivel Mount; Boom Mount; Suspended - Lincoln Electric LF-72/74 Service Manual

A-4

BENCH MOUNT

The LF-72 mounts in a variety of configurations. As
shipped from the factory, the LF-72 is suitable for
bench mounting or placing directly on top of the weld-
ing power source (CV-xxx and DC-xxx product family
only).
Bench Mount

SWIVEL MOUNT

Both the standard duty bench model and heavy duty
bench model may be mounted onto a swivel when a
top a welding power source.
Swivel Kit and Bench Model, Standard Duty
Swivel Kit and Base Model LF-72
INSTALLATION

BOOM MOUNT

When boom mounting, remove the wire reel stand (if
assembled) and secure the wire feeder directly to the
desired surface.

SUSPENDED

Only suspend the wire feeder by the lift bail of the
portability kit.
Alternative methods for hanging the wire feeder
must not be used unless insulation is provided
between the wire feeder enclosure and the hanging
device.
------------------------------------------------------------------------
LF-72/74
WARNING
A-4