Bench Mount; Swivel Mount; Boom Mount; Suspended - Lincoln Electric LF-74 Operator's Manual

A-3

BENCH MOUNT

The LF-74 mounts in a variety of configurations. As
shipped from the factory, the LF-74 is suitable for
bench mounting or placing directly on top of the weld-
ing power source (CV-xxx and DC-xxx product family
only).
Bench Mount

SWIVEL MOUNT

The base model and heavy duty bench models may
be mounted onto a swivel when a top a welding power
source.
K1557-1Swivel Kit and Bench Model, with Heavy
Duty Wire Reel Stand.
K2332-1 Swivel Kit and Base Model LF-74
INSTALLATION

BOOM MOUNT

When boom mounting, remove the wire reel stand (if
assembled) and secure the wire feeder directly to the
desired surface.

SUSPENDED

Only suspend the wire feeder by the handle/lift bail of
the portability kit.
K2426-1 shown with K2328-1Standard Duty Wire
Reel Stand and K2331-1 Lift Bail
Alternative methods for hanging the wire feeder
must not be used unless insulation is provided
between the wire feeder enclosure and the hang-
ing device.
------------------------------------------------------------------------
LF-74
WARNING
A-3