A-3
SAFETY PRECAUTION
ELECTRIC SHOCK can kill.
• Only qualified personnel should
perform this installation.
• Turn off the input power to the
power source at the disconnect
switch or fuse box before working
on this equipment. Turn off the
input power to any other equipment
connected to the welding system at
the disconnect switch or fuse box
before working on this equipment.
• Do not touch electrically hot parts.
----------------------------------------------------------------------------------------
LOCATION
The LF-72 may be placed on a bench or mounted on
top of a welding power source.
Place the LF-72 in a clean and dry location.
Do not stack the LF-72.
INSTALLATION
MOUNTING
For location and size, LF-72 Bench Model Rear
Mounting Holes (See Figure A.1) and for Bottom
Mounting Holes (See Figure A.2).
LF-72/74
FIGURE A.1
FIGURE A.2
A-3