Installation Of Driver (Pc Only) - Porsche 911 GT3 RS Owner's Manual

Installation of driver (PC only)

For PC use, you need to install the driver before
connecting the wheel.
The driver requires less than 10 MB of space on your
hard disk and is compatible to Windows XP (32-Bit/64-
Bit) or Windows Vista (32-Bit/64-Bit).
The driver can be downloaded at
support.
To make settings or test the functions of your wheel the
USB cable must be connected to your PC and the wheel
must be turned on. To open the driver dialog you have to
go to the control panel, double click „Game Controllers"
and choose the properties of „Porsche Wheel".
In this window you can change several settings of the
wheel and test if all buttons are working fi ne.
www.FANATEC.com/
18
Electrical connection (Wheel power supply)
Step 1: Connect power supply
Please plug-in the power supply to the right side of the
base. When the wheel is successfully connected to the
PC and it powers up, it automatically self calibrates with
a full rotation to the right side and back to the middle
position. Please keep your hands off the wheel during
calibration.