Installation Installation Of Gear Sticks - Porsche 911 GT3 RS Owner's Manual

INSTALLATION
Installation of gear sticks
1. Make sure that the tube fi xation screws are lose.
Use a coin and not a screwdriver.
2. Insert the metal tubes into the base from the left
or right side. The tubes has to be fully inserted
until it comes out of the base on the other side.
3. To build up some counterforce use a fl at
underground and place the wheel vertical on
the tubes. Then push the wheel down with soft
pressure.
4. Tighten the tube fi xation screws with a coin.
5. Choose either the sequential or the 6-speed gear
stick and attach it to the tubes.
14