Simulator Installation - Porsche 911 GT3 RS Owner's Manual

5. Fasten the quick release clamps.
Please note that if the shape of the edge of your table
does not allow the fi xation with the table clamp you could
use some books to fi x it.

Simulator installation

If you prefer a permanent installation on a table or
simulator you can fi x the wheel with 4 screws to any fl at
surface.
Please use the drilling template to drill the holes.
The length of the screws depend on your table so we did
not include any screws but you can use standard metric
screws with a diameter of 6 mm.
17